Airtac SC80 Standard Cylinder SC80X210
The AirTAC SC80 Standard Cylinder SC80X210 is a genuine double-acting standard air cylinder with a Ø80mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke210 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X210
The SC80X210 is an 80 mm bore, 210 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. At 0.5 MPa it generates 2513 N pushing and 2268 N pulling, rising to a substantial 4523 N at the 0.9 MPa maximum operating pressure, making it a capable mid-range actuator for general industrial tasks.
This model uses a 25 mm diameter piston rod with M20x1.5 threads and PT3/8 ports. The body length A is 182 mm, giving a total extended length of approximately 392 mm. It features an adjustable air cushion of 28 mm at each end to decelerate the piston smoothly, and is supplied here in the basic configuration with TPU seals and standard PT threads.
Airtac SC80 Standard Cylinder SC80X210 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X210 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X210
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X210 Is Used
Conveyor Diverter
The 2513 N push force at 0.5 MPa reliably actuates heavy diverter gates on wide conveyor lines, handling packages or bulk materials with the 210 mm stroke for full gate travel.
Press Clamping
Delivers a firm 4523 N clamping force at 0.9 MPa for holding large workpieces during welding or assembly, with the 28 mm cushion absorbing shock at the end of the clamp stroke.
Material Lift Assist
Powers a scissor lift or tilt table with 2268 N of pulling force to return the platform, using the 210 mm stroke for a significant vertical displacement in ergonomic workstations.
Is the Airtac SC80 Standard Cylinder SC80X210 the Right Cylinder?
Select the SC80X210 for applications needing around 2500 N of force at standard shop air pressure. If your load requires more, stepping up to the SC100 bore provides 3927 N at the same 0.5 MPa. For lighter, faster-moving loads, the SC63 delivers 1559 N. At a 210 mm stroke, the rod is well-supported within the standard range, but always ensure the load is guided and aligned axially to prevent bending stress on the 25 mm rod and its bearings.
When replacing an existing cylinder, match five key points: 80 mm bore, 210 mm stroke, PT3/8 port thread, the specific mounting accessory (this is a basic body, so confirm your existing mounts), and the magnet option (this model has no built-in magnet). The SC is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X210 FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It can only directly replace another AirTAC SC tie-rod cylinder with an 80 mm bore, 210 mm stroke, PT3/8 ports, and matching mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X210
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.