Airtac SC80 Standard Cylinder SC80X210FB
The AirTAC SC80 Standard Cylinder SC80X210FB is a genuine double-acting standard air cylinder with a Ø80mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke210 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X210FB
The AirTAC SC80X210FB is a double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at the 0.9 MPa maximum operating pressure). Its 25 mm diameter piston rod and 28 mm adjustable air cushion make it well-suited for medium-duty linear tasks where a controlled, soft end-of-stroke deceleration is required.
This configuration includes the FB rear flange mount (F-SC80FB), which bolts directly to a machine panel or end-plate for rigid, axial alignment. With a 210 mm stroke and a body length A of 182 mm, the total extended length is approximately 392 mm, fitting compact machine layouts that need a genuine, high-value pneumatic actuator.
Airtac SC80 Standard Cylinder SC80X210FB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X210FB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X210FB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X210FB Is Used
Material Handling Gates
The 2513 N push force at 0.5 MPa reliably actuates diverter gates and stops on conveyor lines, with the rear flange providing a fixed, stable mounting point.
Press-Fit Assembly
Delivers a controlled 210 mm stroke for pressing bearings or bushings into housings, using the adjustable cushion to prevent impact damage at the end of the stroke.
Machine Tool Clamping
Provides consistent clamping force for workpieces on CNC fixtures. The FB mount allows the cylinder body to be securely fastened behind a bulkhead.
Is the Airtac SC80 Standard Cylinder SC80X210FB the Right Cylinder?
For applications needing more force, stepping up to the SC100 bore provides 3927 N at 0.5 MPa; for a lighter, more compact solution, the SC63 offers 1559 N. This 210 mm stroke is within the standard range for the 80 mm bore (max 1500 mm).
When replacing an existing cylinder, match five points: 80 mm bore, 210 mm stroke, PT3/8 port thread, FB rear flange mounting, and the standard non-magnetic piston. The SC is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X210FB FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. For a direct replacement, you must match another AirTAC SC tie-rod cylinder with an 80 mm bore, 210 mm stroke, PT port, and FB rear flange mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X210FB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.