Airtac SC80 Standard Cylinder SC80X210S
The AirTAC SC80 Standard Cylinder SC80X210S is a genuine double-acting standard air cylinder with a Ø80mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke210 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X210S
The AirTAC SC80X210S is an 80 mm bore, 210 mm stroke single-rod double-acting pneumatic cylinder with a built-in magnet. The magnet allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for non-contact position sensing. At 0.5 MPa, this cylinder delivers 2513 N of push force and 2268 N of pull force, with a maximum operating thrust of 4523 N at 0.9 MPa.
This model uses a 25 mm diameter piston rod with an M20x1.5 male thread and PT3/8 ports. The adjustable air cushion at each end provides a 28 mm deceleration zone to reduce end-of-stroke impact. Standard body length A is 182 mm, making the total extended length approximately 392 mm. Operating pressure is 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Airtac SC80 Standard Cylinder SC80X210S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X210S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X210S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X210S Is Used
Conveyor Diverter Gates
The 2513 N push force at 0.5 MPa easily actuates diverter gates and sorting paddles on medium-duty package handling lines. The built-in magnet provides end-of-stroke confirmation via CMSG sensors.
Clamping & Fixturing
Ideal for pneumatic clamping stations in CNC machining or welding cells. The 210 mm stroke provides ample clearance for part loading, and the adjustable cushion protects the fixture from hammering.
Baler & Compactor Ejection
Delivers up to 4523 N at 0.9 MPa to eject compacted waste or recyclables. The tie-rod construction handles the repetitive shock loads common in recycling equipment.
Is the Airtac SC80 Standard Cylinder SC80X210S the Right Cylinder?
The SC80 bore sits between the SC63 (1559 N push at 0.5 MPa) and SC100 (3927 N push at 0.5 MPa). If your load requires more than 2513 N of thrust at standard plant pressure, step up to the 100 mm bore. For lighter, faster-cycling loads, the 63 mm bore reduces air consumption. The 210 mm stroke is within the standard range for this bore (max 1500 mm).
For replacement, match five points: 80 mm bore, 210 mm stroke, PT3/8 port thread, the built-in magnet (-S suffix), and any mounting accessory you currently use. At 210 mm stroke, the 25 mm rod is well-supported, but if side loads are present, consider an external guide rod assembly or a guided cylinder to protect the rod bearing from bending moments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X210S FAQ
At 0.5 MPa (5 bar), the cylinder pushes with 2513 N and pulls with 2268 N. At the maximum operating pressure of 0.9 MPa, push force is 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix means this SC80X210S has a built-in magnet on the piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod tubes to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X210S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.