Airtac SC80 Standard Cylinder SC80X210TC
The AirTAC SC80 Standard Cylinder SC80X210TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke210 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X210TC
The AirTAC SC80X210TC is an 80 mm bore double-acting tie-rod cylinder with a 210 mm stroke, factory-equipped with a centre trunnion (TC) mount and TCM1 bracket for pivoting applications. Operating on filtered air at 0.15–1.0 MPa, it generates 2513 N of push force at 0.5 MPa and up to 4523 N at 0.9 MPa, driven through a 25 mm diameter piston rod with M20x1.5 threads.
This model features a 28 mm adjustable air cushion at each end to decelerate the piston smoothly, reducing impact noise and wear. With a body length A of 182 mm and a PT3/8 port, the SC80X210TC is a genuine AirTAC cylinder suited for medium-duty automation tasks requiring a pivoting mount.
Airtac SC80 Standard Cylinder SC80X210TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X210TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X210TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X210TC Is Used
Conveyor Diverters
The 2513 N push force at 0.5 MPa and pivoting trunnion mount make this cylinder ideal for actuating gate arms or pushers on medium-duty conveyor lines.
Clamping & Welding Fixtures
Centre trunnion mounting allows the cylinder body to swing, perfect for pneumatic clamping arms in welding jigs where the cylinder must pivot during actuation.
Agricultural Machinery
Delivers reliable force for bin gates, chute controls, and linkage actuation on harvesters or spreaders, with a 28 mm cushion to handle repetitive end-of-stroke impacts.
Is the Airtac SC80 Standard Cylinder SC80X210TC the Right Cylinder?
Select the SC80 bore when your application needs between 2513 N and 4523 N of pneumatic force. If you require less force, consider stepping down to the SC63 bore (1559 N push at 0.5 MPa); for heavier loads, the SC100 bore provides 3927 N at the same pressure. The 210 mm stroke is within the 1500 mm maximum standard stroke for this bore.
For replacement, match five key points: 80 mm bore, 210 mm stroke, PT3/8 port thread, centre trunnion (TC) mount with TCM1 bracket (F-SC80TC), and no magnet. This cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X210TC FAQ
At the standard operating pressure of 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
No. The SC80X210TC is a double-acting cylinder that requires continuous air pressure to maintain position. If pressure is lost or the directional valve is centered, the piston rod will drift. For load holding, you must add an external rod brake or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X210TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.