Airtac SC80 Standard Cylinder SC80X215
The AirTAC SC80 Standard Cylinder SC80X215 is a genuine double-acting standard air cylinder with a Ø80mm bore and 215mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke215 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X215
The AirTAC SC80X215 is a double-acting tie-rod cylinder with an 80 mm bore and 215 mm stroke, generating a push force of 2513 N at 0.5 MPa (4523 N at 0.9 MPa). Its 25 mm diameter piston rod and 28 mm adjustable air cushion provide reliable deceleration for mid-range automation tasks.
This model uses the standard PT3/8 port thread and TPU seals rated for -20 to +70 °C. With a body length A of 182 mm, the total extended length is approximately 397 mm, making it a compact choice where a shorter ISO 15552 cylinder would not fit.
Airtac SC80 Standard Cylinder SC80X215 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X215 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 215 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X215
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×215 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X215 Is Used
Package Diverting
The 2513 N push force at 0.5 MPa easily shifts cartons or totes on a conveyor line, with the 215 mm stroke providing enough reach for lane diversion gates.
Clamping & Fixturing
Delivers stable, high-force clamping for CNC fixtures or welding jigs. The adjustable cushion reduces impact vibration, protecting both the workpiece and tooling.
Press-Fit Assembly
Ideal for pressing bearings or bushings into housings. The 4523 N maximum thrust at 0.9 MPa handles light to medium interference fits reliably.
Is the Airtac SC80 Standard Cylinder SC80X215 the Right Cylinder?
Choose the SC80X215 when the 50 mm bore (982 N at 0.5 MPa) is undersized but the 100 mm bore (3927 N at 0.5 MPa) is excessive. The 215 mm stroke is within the 1500 mm maximum standard stroke for this bore. For strokes over 300 mm, evaluate side-load bending on the 25 mm rod; an external guide or guided cylinder may be needed.
To replace an existing unit, match five points: 80 mm bore, 215 mm stroke, PT3/8 port thread, basic mounting (no bracket), and the absence of a magnet. This cylinder is not dimensionally interchangeable with ISO 15552 profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X215 FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N.
This specific model (SC80X215) does not include the -S magnet option, so the piston lacks a magnetic ring. To use CMSG or DMSG sensors, order the SC80X215-S variant which has a built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X215
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.