Airtac SC80 Standard Cylinder SC80X215S
The AirTAC SC80 Standard Cylinder SC80X215S is a genuine double-acting standard air cylinder with a Ø80mm bore and 215mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke215 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X215S
The SC80X215S is an 80 mm bore, 215 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It delivers a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod.
This model includes the -S suffix, indicating a built-in magnet on the piston. This allows for direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for non-contact position sensing. The cylinder body length is 182 mm, and with the 215 mm stroke, the total extended length is approximately 397 mm.
Airtac SC80 Standard Cylinder SC80X215S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X215S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 215 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X215S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×215 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X215S Is Used
Material Handling & Sorting
Provides the 2513 N push force at 0.5 MPa needed to divert medium-weight packages on a conveyor line. The built-in magnet allows sensors to verify full extension and retraction for reliable automated sortation.
Clamping & Assembly Fixtures
Delivers a consistent 4523 N clamping force at 0.9 MPa for holding parts during welding or assembly. The 215 mm stroke provides ample clearance for loading and unloading workpieces in a fixture.
Agricultural Gate & Chute Actuation
Operates a diverter chute or slide gate handling granular materials. The magnet-equipped SC80X215S provides end-of-stroke confirmation to a PLC, ensuring the gate is fully open or closed in dusty environments.
Is the Airtac SC80 Standard Cylinder SC80X215S the Right Cylinder?
Select the SC80 for applications needing 2513 N of push force at standard 0.5 MPa pressure. If your load requires more force, step up to the SC100 bore which provides 3927 N at the same pressure. For a lighter, more compact solution, the SC63 bore offers 1559 N. This cylinder has a 215 mm stroke, which is well within the 1500 mm maximum standard stroke for the 80 bore. For strokes over 300 mm, always evaluate side-loading on the 25 mm rod and consider an external guide or a guided cylinder to prevent rod bearing damage and bending.
For a direct replacement, match these five points: 80 mm bore, 215 mm stroke, PT port thread, basic mounting (no bracket), and the built-in magnet (-S) for sensor compatibility. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X215S FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force on the retract stroke is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Yes. The -S suffix in the model code means this cylinder has a built-in magnetic piston. You can clamp compatible AirTAC CMSG, DMSG, or EMSG solid-state sensors directly onto the cylinder barrel's sensor groove to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X215S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.