Airtac SC80 Standard Cylinder SC80X215STC
The AirTAC SC80 Standard Cylinder SC80X215STC is a genuine double-acting standard air cylinder with a Ø80mm bore and 215mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke215 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X215STC
The SC80X215STC is an 80 mm bore, 215 mm stroke double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa. Its 25 mm diameter piston rod and 28 mm adjustable air cushion provide smooth deceleration, making it a reliable workhorse for mid-range industrial automation tasks.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and ships with the TC centre trunnion mount and TCM1 bracket (F-SC80TC) for pivoting applications. The standard PT port thread and TPU seals suit typical factory air environments from -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X215STC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X215STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 215 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X215STC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×215 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X215STC Is Used
Conveyor Diverter Gates
The 215 mm stroke and 2513 N push force at 0.5 MPa reliably actuates diverter gates on packaging and sortation lines, while the centre trunnion mount allows the cylinder to pivot as it strokes.
Clamping & Fixturing
Ideal for pneumatic clamping fixtures in machining or welding cells. The built-in magnet enables end-of-stroke confirmation via CMSG sensors, ensuring the part is securely held before the cycle starts.
Process Valve Actuation
Provides the linear thrust needed to open and close quarter-turn valves or slide gates. The trunnion mount handles the arcing motion, and the 28 mm cushion absorbs end-of-travel shock smoothly.
Is the Airtac SC80 Standard Cylinder SC80X215STC the Right Cylinder?
Choose the SC80 when your application needs between 2513 N (push at 0.5 MPa) and 4523 N (push at 0.9 MPa). If you require less force, stepping down to the SC63 bore provides 1559 N at 0.5 MPa; for significantly more force, the SC100 bore offers 3927 N at the same pressure. For this 215 mm stroke, ensure side loads are minimal or use an external guide, as the rod bearing is not designed to support heavy bending moments.
When replacing an existing cylinder, match five points: 80 mm bore, 215 mm stroke, PT port thread, the TC centre trunnion mounting accessory (F-SC80TC), and the built-in magnet (-S) for sensor compatibility. This ensures a direct dimensional and functional swap.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X215STC FAQ
At the standard operating pressure of 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is shorter in overall length than an ISO 15552 cylinder, so it is not dimensionally interchangeable. For a direct replacement, you must match the SC80 bore, 215 mm stroke, PT ports, TC centre trunnion mount, and the built-in magnet option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X215STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.