Airtac SC80 Standard Cylinder SC80X220
The AirTAC SC80 Standard Cylinder SC80X220 is a genuine double-acting standard air cylinder with a Ø80mm bore and 220mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke220 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X220
The SC80X220 is an 80 mm bore, 220 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. At 0.5 MPa it produces 2513 N push force and 2268 N pull force, scaling up to a substantial 4523 N push at the maximum operating pressure of 0.9 MPa.
This model features a 25 mm diameter piston rod with an M20x1.5 male thread and PT3/8 port connections. The cylinder body has a length A of 182 mm, resulting in a total extended length of approximately 402 mm. It includes an adjustable pneumatic cushion (28 mm length) at both ends to decelerate the piston smoothly, reducing end-of-stroke impact.
Airtac SC80 Standard Cylinder SC80X220 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X220 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X220
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X220 Is Used
Material Stopping & Diverting
Provides the force to reliably stop or divert medium-weight packages on conveyor lines, handling 2513 N of push at standard shop air pressure.
Clamping & Holding Fixtures
Delivers up to 4523 N of clamping force at 0.9 MPa for securing workpieces during welding, assembly, or machining operations.
Agricultural Gate & Chute Actuation
Operates heavy chute gates or sorting paddles in agricultural processing, with a robust tie-rod design that withstands dusty environments.
Is the Airtac SC80 Standard Cylinder SC80X220 the Right Cylinder?
For applications needing slightly less force in a more compact body, the 63 mm bore SC63 series provides 1559 N at 0.5 MPa. If your load requires a higher force margin, stepping up to the 100 mm bore SC100 series offers 3927 N at the same pressure. Always confirm the PT3/8 port matches your existing fittings.
At a 220 mm stroke, side-loading on the 25 mm rod should be evaluated. While not an extreme extension, ensure the load is guided externally if any lateral force is present to prevent rod bearing wear and seal leakage. To replace an existing cylinder, match five points exactly: 80 mm bore, 220 mm stroke, PT3/8 port thread, basic (no) mounting, and confirm no magnet is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X220 FAQ
The theoretical push force at 0.5 MPa is 2513 N, and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
No. The AirTAC SC series is a tie-rod cylinder that is physically shorter than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It must be replaced with another AirTAC SC tie-rod cylinder matching the 80 mm bore, 220 mm stroke, and PT3/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X220
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.