Airtac SC80 Standard Cylinder SC80X220CA
The AirTAC SC80 Standard Cylinder SC80X220CA is a genuine double-acting standard air cylinder with a Ø80mm bore and 220mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke220 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X220CA
The SC80X220CA is a double-acting pneumatic cylinder delivering a push force of 2513 N at 0.5 MPa (4523 N at the 0.9 MPa maximum operating pressure). Its 80 mm bore and 220 mm stroke suit medium-duty linear tasks where a rear pivot mount is required.
This model features a 25 mm diameter piston rod with M20x1.5 male threads and a 28 mm adjustable air cushion at each end for smooth deceleration. The CA suffix designates a rear single clevis mount (accessory F-SC80CA), allowing the cylinder body to pivot during operation. Ports are PT3/8, and the standard TPU seals operate reliably from -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X220CA Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X220CA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X220CA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X220CA Is Used
Agricultural Machinery
The rear clevis mount allows the cylinder to pivot, making it ideal for actuating chutes, gates, or lift arms on harvesters and spreaders where the load path changes angle.
Clamping & Fixturing
With 2513 N of clamping force at standard line pressure, this cylinder secures workpieces in CNC fixtures or welding jigs, with the adjustable cushion preventing part damage from hard stops.
Diverter Gates
Used on conveyor systems to sort or divert packages. The 220 mm stroke provides sufficient travel to fully extend a gate, and the clevis mount absorbs the pivoting motion.
Is the Airtac SC80 Standard Cylinder SC80X220CA the Right Cylinder?
For a step up in force, the SC100 bore offers 3927 N push at 0.5 MPa; to step down, the SC63 bore provides 1559 N. The 220 mm stroke is well within the 1500 mm maximum standard stroke for this bore, so no special stroke considerations apply.
When replacing this cylinder, match five points: 80 mm bore, 220 mm stroke, PT3/8 port thread, the CA rear single clevis mounting accessory, and the absence of a magnet. This SC series is a tie-rod cylinder, shorter than an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC80 models with the same configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X220CA FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The SC80X220CA is a double-acting cylinder that requires continuous air pressure to maintain position. If pressure is lost or the directional valve is centered, the piston will drift. For load holding, you must add a pilot-operated check valve or an external mechanical rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X220CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.