Airtac SC80 Standard Cylinder SC80X223SN
The AirTAC SC80 Standard Cylinder SC80X223SN is a genuine double-acting standard air cylinder with a Ø80mm bore and 223mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke223 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X223SN
The SC80X223SN is an 80 mm bore, 223 mm stroke double-acting pneumatic cylinder producing 2513 N push force at 0.5 MPa (up to 4523 N at 0.9 MPa). Its 25 mm diameter piston rod and 28 mm adjustable air cushion provide smooth deceleration for mid-range automation tasks.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise position feedback without external brackets. The NBR seal (-N suffix) offers reliable sealing for general industrial environments, and the body length A of 182 mm keeps the overall envelope compact.
Airtac SC80 Standard Cylinder SC80X223SN Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X223SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 223 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X223SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×223 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X223SN Is Used
Package Sorting Gate
Actuates diverter gates on conveyor lines. The 2513 N push force at 0.5 MPa easily moves packages, while the built-in magnet allows sensors to confirm gate position for reliable sortation.
Clamping & Fixturing
Provides consistent clamping force for CNC machining fixtures. The 223 mm stroke accommodates varied part sizes, and NBR seals offer durability in oily workshop air conditions.
Material Lift & Transfer
Pushes or lifts components between stations. The 25 mm rod resists buckling at this stroke length, and the adjustable cushion softens the end-of-stroke impact for smooth handling.
Is the Airtac SC80 Standard Cylinder SC80X223SN the Right Cylinder?
For applications needing slightly more force, stepping up to the 100 mm bore provides 3927 N at 0.5 MPa. If space is a premium, the 63 mm bore delivers 1559 N at the same pressure. At a 223 mm stroke, ensure the rod is not subjected to high side loads; an external guide or guided cylinder is recommended to prevent rod bearing wear and bending. When replacing, match bore, stroke, PT port thread, the built-in magnet, and NBR seal material for a direct fit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X223SN FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix indicates a built-in magnet along the barrel. This allows you to clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod tube to detect piston position without any additional mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X223SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.