Airtac SC80 Standard Cylinder SC80X225CB
The AirTAC SC80 Standard Cylinder SC80X225CB is a genuine double-acting standard air cylinder with a Ø80mm bore and 225mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke225 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X225CB
The SC80X225CB is an 80 mm bore, 225 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It generates a push force of 2513 N at 0.5 MPa and 4523 N at the maximum operating pressure of 0.9 MPa, making it a robust choice for medium-duty linear actuation tasks.
This model is configured with a rear double clevis (CB) mounting, part F-SC80CB, allowing the cylinder body to pivot during operation. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide smooth deceleration, while the standard PT1/8 port thread ensures straightforward pneumatic connections.
Airtac SC80 Standard Cylinder SC80X225CB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X225CB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X225CB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X225CB Is Used
Agricultural Equipment
Operates pivot linkages on seeders and tillage implements where the rear clevis mount accommodates the swinging motion of the tool bar.
Conveyor Diverters
Pushes diverting gates on material handling conveyors, with the double clevis allowing the cylinder to follow the gate's arc without binding.
Clamping & Welding Fixtures
Provides the 2513 N clamping force at standard line pressure for holding large weldments or castings in position during assembly.
Is the Airtac SC80 Standard Cylinder SC80X225CB the Right Cylinder?
For applications needing slightly less force, the 63 mm bore SC series delivers 1559 N push at 0.5 MPa, while stepping up to the 100 mm bore provides 3927 N. The 225 mm stroke is well within the 1500 mm maximum standard stroke for this bore size.
When replacing this cylinder, match five key points: 80 mm bore, 225 mm stroke, PT port thread, rear double clevis (CB) mounting, and the absence of a magnet. Always verify the mounting centre dimensions against the existing F-SC80CB clevis bracket to ensure a direct fit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X225CB FAQ
At 0.7 MPa operating pressure, the 80 mm bore SC cylinder delivers 3518 N of push force and 2268 N of pull force on the retract stroke, accounting for the 25 mm rod area.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder. The body length A for the 80 mm bore is 182 mm, so mounting dimensions and tie-rod spacing will differ. Only replace with another AirTAC SC80 tie-rod cylinder matching the CB mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X225CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.