Airtac SC80 Standard Cylinder SC80X225SH
The AirTAC SC80 Standard Cylinder SC80X225SH is a genuine double-acting standard air cylinder with a Ø80mm bore and 225mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke225 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X225SH
The AirTAC SC80X225SH is a double-acting tie-rod cylinder delivering 2513 N push force at 0.5 MPa (4523 N at 0.9 MPa). Its 80 mm bore, 25 mm rod, and 225 mm stroke suit medium-duty clamping, pressing, and material-handling tasks that need consistent pneumatic power.
This -SH variant includes a built-in magnet for CMSG/DMSG/EMSG sensors and Viton (FKM) seals, raising the operating temperature range to 0–150 °C. The adjustable air cushion (28 mm) decelerates the piston smoothly, while the PT1/8 port thread and body length A of 182 mm keep the footprint compact.
Airtac SC80 Standard Cylinder SC80X225SH Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X225SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X225SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X225SH Is Used
Hot-Zone Part Transfer
Viton seals allow the SC80X225SH to shuttle castings or molded parts through ovens and heated workstations up to 150 °C without seal degradation.
Thermal Forming Press
With 4523 N of force at 0.9 MPa, this cylinder applies consistent pressure in blister-pack or composite forming tools that run at elevated temperatures.
Sensor-Monitored Assembly
The built-in magnet lets CMSG/DMSG sensors confirm end-of-stroke position on automated assembly fixtures, ensuring each cycle completes before the next part is indexed.
Is the Airtac SC80 Standard Cylinder SC80X225SH the Right Cylinder?
Choose the SC80 when 0.5 MPa push force around 2513 N fits the load. If you need more force, step up to the SC100 bore (3927 N at 0.5 MPa); for a lighter, faster actuator, the SC63 bore offers 1559 N. For this 225 mm stroke, side-loading is moderate, but always align the rod axis with the load path or add an external guide to protect the rod bearing.
To replace an existing unit, match five points: 80 mm bore, 225 mm stroke, PT port thread, the built-in magnet (-S), and the basic mounting style. The SC series is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X225SH FAQ
At 0.5 MPa supply pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical force at 1.0 MPa is 513 kgf.
No. The SC80X225SH is a double-acting cylinder and does not lock or hold position when pressure is exhausted or the valve is centered. If load holding is required, add a pilot-operated check valve or an external rod brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X225SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.