Airtac SC80 Standard Cylinder SC80X230
The AirTAC SC80 Standard Cylinder SC80X230 is a genuine double-acting standard air cylinder with a Ø80mm bore and 230mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke230 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X230
The AirTAC SC80X230 is a double-acting tie-rod cylinder delivering a robust 2513 N of push force at 0.5 MPa, scaling up to 4523 N at the maximum operating pressure of 0.9 MPa. With an 80 mm bore, 25 mm piston rod, and a 230 mm stroke, it provides a compact yet powerful linear drive for medium-to-heavy industrial tasks.
This model features a 28 mm adjustable air cushion at each end to decelerate the piston smoothly, reducing end-of-stroke impact. The body length A is 182 mm, making the total extended length approximately 412 mm. It uses PT3/8 ports and operates on filtered air within a standard temperature range of -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X230 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X230 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X230
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X230 Is Used
Material Handling Gates
Operates diverter gates and stops on conveyor lines, using its 2513 N push force at 0.5 MPa to reliably redirect packages and pallets.
Clamping & Press-Fixturing
Provides strong, controlled clamping in machining centers and welding jigs, where the 28 mm cushion ensures a soft stop and prevents part vibration.
Farm Implement Actuation
Powers chute controls and linkage adjustments on agricultural machinery, handling dusty conditions with the standard TPU seal's durability.
Is the Airtac SC80 Standard Cylinder SC80X230 the Right Cylinder?
Choose the SC80 bore when your application needs a push force between 2513 N and 4523 N. If your load requires less force, stepping down to an SC63 bore provides 1559 N at 0.5 MPa. For higher demands, the SC100 bore offers 3927 N at the same pressure. For this 230 mm stroke, ensure the rod is not subjected to significant side loading; if lateral forces are present, use an external linear guide to prevent rod bearing damage and bending.
When replacing an existing cylinder, match five critical points: 80 mm bore, 230 mm stroke, PT3/8 port thread, the basic (no bracket) mounting configuration, and the absence of a built-in magnet. This ensures a direct dimensional and functional direct for another AirTAC SC80 tie-rod unit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X230 FAQ
At 0.7 MPa operating pressure, the SC80X230 produces a theoretical push force of 3518 N and a pull force of 2268 N. The maximum push force at 0.9 MPa is 4523 N.
No, this specific model code (SC80X230) does not include the '-S' magnet suffix. It lacks the built-in piston magnet required for CMSG/DMSG/EMSG sensors. You would need to order model SC80X230-S for sensor-ready capability.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X230
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.