Airtac SC80 Standard Cylinder SC80X230SCB
The AirTAC SC80 Standard Cylinder SC80X230SCB is a genuine double-acting standard air cylinder with a Ø80mm bore and 230mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke230 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X230SCB
The SC80X230SCB is an 80 mm bore, 230 mm stroke double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa. Its 25 mm diameter piston rod and 28 mm adjustable air cushion reliably decelerate end-of-stroke impact, making it a robust linear drive for medium-duty automation tasks.
This configuration includes a built-in magnet for CMSG/DMSG/EMSG position sensors and a rear double clevis (CB) mount, using bracket F-SC80CB for pivoting attachment. The standard PT1/8 port and TPU seals suit ambient temperatures from -20 to +70 °C, providing a genuine AirTAC solution for articulated machine linkages.
Airtac SC80 Standard Cylinder SC80X230SCB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X230SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X230SCB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X230SCB Is Used
Agricultural Implement Control
Operates pivoting chutes or hopper doors on harvesters and spreaders, where the rear clevis mount allows the cylinder to swing freely with the linkage.
Conveyor Diverter Gates
Actuates medium-duty diverter flaps in material handling lines. The magnetic piston enables end-of-stroke confirmation via barrel-mounted sensors.
Welding Fixture Clamping
Provides consistent clamping force for weldments on a pivoting arm. The double clevis mounting simplifies alignment in articulated fixture designs.
Is the Airtac SC80 Standard Cylinder SC80X230SCB the Right Cylinder?
For higher thrust, step up to the 100 mm bore SC100 series, which provides 3927 N at 0.5 MPa. If your application requires a guided motion to prevent rod rotation, consider pairing this cylinder with an external guide rail, as the SC series is a non-guided tie-rod design. To ensure a correct direct replacement, match five key points: 80 mm bore, 230 mm stroke, PT1/8 port thread, the -S magnet option for sensors, and the CB rear double clevis mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X230SCB FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Match the 80 mm bore, 230 mm stroke, PT1/8 pneumatic ports, and ensure your mounting setup uses a rear double clevis (F-SC80CB). Also verify your sensors are compatible with the built-in magnet (-S) for direct barrel mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X230SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.