Airtac SC80 Standard Cylinder SC80X230SFB
The AirTAC SC80 Standard Cylinder SC80X230SFB is a genuine double-acting standard air cylinder with a Ø80mm bore and 230mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke230 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X230SFB
The SC80X230SFB is an 80 mm bore, 230 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It delivers a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors and is supplied with a rear rectangular flange (FB mount, accessory F-SC80FB) for stable end-face installation. The adjustable air cushion (28 mm length) decelerates the piston smoothly, and the standard PT1/4 port threads connect easily to common pneumatic fittings.
Airtac SC80 Standard Cylinder SC80X230SFB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X230SFB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X230SFB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X230SFB Is Used
Material Handling Gates
The 2513 N push force at 0.5 MPa reliably actuates diverter gates and stops on conveyor lines, with the rear flange mount providing a rigid, fixed anchor point.
Clamping & Fixturing
Delivers consistent clamping pressure for machining fixtures. The built-in magnet allows engineers to add position sensors for end-of-stroke confirmation in automated cells.
Farm Implement Actuation
Suitable for remote actuation on agricultural equipment like chute controls or sprayer boom adjustments, where the rear flange fits compactly against a bulkhead.
Is the Airtac SC80 Standard Cylinder SC80X230SFB the Right Cylinder?
For applications needing less force, the 63 mm bore SC63 series provides 1559 N push at 0.5 MPa; for higher thrust, step up to the 100 mm bore which offers 3927 N at the same pressure. The 230 mm stroke is well within the 1500 mm maximum standard stroke for this bore.
When replacing an existing cylinder, match five points: 80 mm bore, 230 mm stroke, PT port thread, FB rear flange mounting, and the built-in magnet for sensors. At this stroke length, ensure the rod is not subjected to significant side loads; if lateral forces are present, use an external guide rail to prevent rod bending and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X230SFB FAQ
At the standard 0.5 MPa operating pressure, the cylinder produces 2513 N extending (push) and 2268 N retracting (pull). At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Yes. The -S suffix in the model code means a magnet is built into the piston. You can clamp compatible CMSG, DMSG, or EMSG reed or solid-state sensors directly onto the barrel tie-rod tube to detect piston position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X230SFB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.