Airtac SC80 Standard Cylinder SC80X230STC
The AirTAC SC80 Standard Cylinder SC80X230STC is a genuine double-acting standard air cylinder with a Ø80mm bore and 230mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke230 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X230STC
The AirTAC SC80X230STC is an 80 mm bore double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa (up to 4523 N at 0.9 MPa). Its 230 mm stroke suits medium-reach clamping, pressing, and material-transfer tasks where a centre trunnion pivot is required.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors and ships with the TC centre trunnion mount and TCM1 bracket (F-SC80TC). The 25 mm diameter piston rod, PT3/8 ports, and 28 mm adjustable air cushion provide reliable deceleration at end-of-stroke.
Airtac SC80 Standard Cylinder SC80X230STC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X230STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X230STC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X230STC Is Used
Pivoting Conveyor Gate
The centre trunnion mount allows the cylinder body to swing as it actuates a diverter gate on a conveyor line, directing packages without binding.
Clamping Fixture
Delivers 2513 N at 0.5 MPa to hold workpieces during welding or machining. The magnetic piston enables end-of-stroke confirmation via barrel-mounted sensors.
Material Transfer Arm
Pivots a lift-and-lower arm in a pick-and-place station. The 230 mm stroke provides sufficient reach, while the 25 mm rod resists bending under axial loads.
Is the Airtac SC80 Standard Cylinder SC80X230STC the Right Cylinder?
Choose the SC80 when the SC63 (1559 N at 0.5 MPa) is force-limited. For higher thrust, step up to the SC100 (3927 N at 0.5 MPa). The 230 mm stroke is within the 1500 mm maximum standard stroke for bore 80.
For a direct replacement, match bore (80 mm), stroke (230 mm), PT3/8 port thread, centre trunnion (TC) mounting, and the built-in magnet (-S). Always confirm the F-SC80TC trunnion bracket is included. At this stroke length, ensure the rod is not subjected to side load; use an external guide rail if the load is not perfectly axial.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X230STC FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It directly replaces another AirTAC SC80 tie-rod cylinder with matching bore, stroke, PT3/8 ports, centre trunnion mount, and magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X230STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.