Airtac SC80 Standard Cylinder SC80X275SH
The AirTAC SC80 Standard Cylinder SC80X275SH is a genuine double-acting standard air cylinder with a Ø80mm bore and 275mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke275 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X275SH
The SC80X275SH is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa, scaling up to 4523 N at the 0.9 MPa maximum operating pressure. Its 25 mm diameter rod and 28 mm adjustable air cushion provide reliable deceleration for mid-range automation tasks. The built-in magnet (-S) allows direct mounting of CMSG/DMSG/EMSG sensors for piston position feedback.
With a 275 mm stroke, this model offers an extended reach while staying within the standard stroke range for the 80 mm bore. The Viton (FKM) seal package (H) upgrades the operating temperature range to 0–150°C, making it suitable for hot environments like autoclaves or foundry equipment. The body length A is 182 mm, and the PT1/4 port supplies the working air.
Airtac SC80 Standard Cylinder SC80X275SH Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X275SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X275SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X275SH Is Used
Hot-Zone Material Handling
The Viton seals withstand 150°C, enabling this cylinder to operate presses, clamps, or transfer mechanisms near ovens and heated platens without seal degradation.
Sensor-Monitored Assembly
The built-in magnet allows CMSG/DMSG sensors to confirm end-of-stroke position, ensuring precise, verified actuation in automated assembly and pick-and-place cells.
Product Diverting & Sorting
With 4523 N of force at 0.9 MPa and a 275 mm stroke, this cylinder can reliably push heavy packages off a main conveyor line onto a sorting lane.
Is the Airtac SC80 Standard Cylinder SC80X275SH the Right Cylinder?
For applications needing more force, stepping up to the 100 mm bore provides 3927 N of push at 0.5 MPa. If space is a constraint, the 63 mm bore offers 1559 N. At a 275 mm stroke, ensure the rod is not subjected to high side loads; an external guide or a guided cylinder is recommended to protect the rod bearing from bending moments. For a direct replacement, match the 80 mm bore, 275 mm stroke, PT port thread, Viton seal, and the integrated magnet for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X275SH FAQ
The theoretical push force is 2513 N at 0.5 MPa and 4523 N at the maximum operating pressure of 0.9 MPa. The pull force on the return stroke is 2268 N at 0.5 MPa, accounting for the 25 mm rod area.
Yes. The 'H' suffix in the model code designates Viton (FKM) seals, which have an operating temperature range of 0 to 150°C. The standard TPU seal range is -20 to 70°C.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X275SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.