Airtac SC80 Standard Cylinder SC80X360S
The AirTAC SC80 Standard Cylinder SC80X360S is a genuine double-acting standard air cylinder with a Ø80mm bore and 360mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke360 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X360S
The AirTAC SC80X360S is a double-acting tie-rod cylinder with an 80 mm bore and 360 mm stroke, factory-equipped with a built-in magnet for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors. At 0.5 MPa it generates 2513 N of push force, placing it in a mid-range power class suitable for general industrial actuation.
The 25 mm diameter chrome-plated rod and 28 mm adjustable air cushion at each end provide smooth deceleration, while the PT1/8 port supplies ample flow. The total extended body length is approximately 542 mm (182 mm body length A + 360 mm stroke), making it a compact choice for space-conscious linear motion tasks.
Airtac SC80 Standard Cylinder SC80X360S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X360S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X360S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X360S Is Used
Material Handling Pushers
The 360 mm stroke and 2513 N force at 0.5 MPa are well-suited for pusher stations on packaging lines, diverting cartons or totes off a main conveyor with a controlled, repeatable motion.
Clamping & Fixturing
With the built-in magnet, sensors can confirm full clamp engagement. The adjustable cushion protects delicate parts during high-speed clamping sequences in CNC or assembly fixtures.
Lift & Transfer Gates
Use this cylinder to operate a vertical lift gate or transfer mechanism. The 2268 N pull force at 0.5 MPa retracts the gate reliably, and the magnetic piston allows end-of-stroke detection for interlocking.
Is the Airtac SC80 Standard Cylinder SC80X360S the Right Cylinder?
Choose the SC80 when the SC63’s 1559 N push at 0.5 MPa is marginal; if you need more force, the SC100 delivers 3927 N at the same pressure. For this 360 mm stroke, ensure the rod is not subjected to high side loads—long unsupported rods can bend and damage the bearing. Add an external linear guide or switch to a guided cylinder if the load is not purely axial.
For a direct replacement, match five points: 80 mm bore, 360 mm stroke, PT port thread, the built-in magnet (-S suffix), and the basic mounting configuration. The SC series is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X360S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 1.0 MPa, the theoretical push force reaches 5026 N. Always apply a safety factor for dynamic loads.
Yes. The '-S' suffix indicates a built-in magnetic piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel tie-rods to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X360S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.