Airtac SC80 Standard Cylinder SC80X360TC
The AirTAC SC80 Standard Cylinder SC80X360TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 360mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke360 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X360TC
The AirTAC SC80X360TC is a double-acting tie-rod cylinder delivering a push force of 2513 N at 0.5 MPa (up to 4523 N at 0.9 MPa), making it a robust choice for medium-duty industrial actuation requiring a 360 mm stroke. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide smooth deceleration, while the PT3/8 port ensures ample flow for speeds up to 800 mm/s.
This model includes the TC centre trunnion mounting (supplied with the TCM1 bracket, order code F-SC80TC), allowing the cylinder to pivot during operation—ideal for swinging or articulating loads. The total extended body length is approximately 542 mm (body length A of 182 mm plus the 360 mm stroke), and the standard TPU seals offer reliable performance from -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X360TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X360TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X360TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X360TC Is Used
Conveyor Diverter Gates
The 360 mm stroke and pivoting TC mount are ideal for swinging diverter arms on packaging or sortation conveyors, smoothly redirecting products between lanes.
Clamp & Weld Fixtures
Provides the 2513 N clamping force needed for holding parts in robotic welding cells, with the trunnion mount allowing the cylinder to self-align as the fixture articulates.
Agricultural Implement Control
Controls chute gates or linkage arms on harvesters and spreaders, where the centre pivot mount accommodates the curved motion of heavy mechanical linkages.
Is the Airtac SC80 Standard Cylinder SC80X360TC the Right Cylinder?
Select the SC80 bore when your application requires a push force between roughly 2513 N and 4523 N (at 0.5-0.9 MPa). If you need more force, step up to the SC100 bore, which provides 3927 N at 0.5 MPa. For a lighter, more compact solution, the SC63 bore offers 1559 N at the same pressure. A 360 mm stroke is within the 1500 mm maximum standard stroke for this bore.
At this stroke length, be mindful of side loads. An unsupported 360 mm rod can experience bending stress if the load is not guided. For applications with significant side forces, use an external linear guide or a guided cylinder to protect the rod bearings and seals. For direct replacement, match the 80 mm bore, 360 mm stroke, PT3/8 port thread, TC centre trunnion mount, and the non-magnetic piston.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X360TC FAQ
At the standard operating pressure of 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Yes. The 'TC' suffix denotes a centre trunnion mount, and AirTAC ships this cylinder with the TCM1 trunnion bracket pre-assembled. The complete accessory part code is F-SC80TC.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X360TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.