Airtac SC80 Standard Cylinder SC80X365S
The AirTAC SC80 Standard Cylinder SC80X365S is a genuine double-acting standard air cylinder with a Ø80mm bore and 365mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke365 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X365S
The AirTAC SC80X365S is an 80 mm bore double-acting tie-rod cylinder delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at 0.9 MPa operating pressure. Its 365 mm stroke suits medium-reach material handling, pressing, and clamping tasks where consistent pneumatic power is needed.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to mount directly onto the barrel for non-contact position sensing. The 25 mm diameter rod, PT3/8 ports, and 28 mm adjustable air cushion provide smooth deceleration, while the 182 mm body length A ensures a compact footprint even at extended stroke.
Airtac SC80 Standard Cylinder SC80X365S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X365S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 365 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X365S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×365 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X365S Is Used
Conveyor Diverting & Stopping
The 365 mm stroke and 2513 N push force at 0.5 MPa reliably actuates diverter gates and pallet stops on medium-duty conveyor lines. The built-in magnet enables end-of-stroke sensing for automated sortation control.
Automated Clamping & Fixturing
Delivers consistent clamping pressure up to 4523 N at 0.9 MPa for CNC workholding and assembly fixtures. The adjustable cushion protects the fixture from impact damage, and the magnetic piston confirms clamp engagement via barrel-mounted sensors.
Lifting & Tipping Stations
Provides the 365 mm linear travel needed for bin tippers and lift-assist mechanisms in warehouse logistics. The tie-rod design handles the repetitive cycling demands of high-throughput distribution centres.
Is the Airtac SC80 Standard Cylinder SC80X365S the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N and 4523 N of push force. If your load requires less force, step down to the SC63 which provides 1559 N at 0.5 MPa; for heavier loads, the SC100 delivers 3927 N at the same pressure. Always match bore, stroke, port thread (PT), and the magnet option (-S) when replacing an existing cylinder.
For strokes of 300 mm or more like this 365 mm unit, avoid applying side loads directly to the rod. The 25 mm rod can experience bending under lateral force when fully extended. Use an external linear guide or a guided cylinder variant to absorb side loads and protect the rod bearing and piston seals from premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X365S FAQ
At 0.5 MPa the push force is 2513 N and pull force is 2268 N. At 0.7 MPa push reaches 3518 N, and at the maximum operating pressure of 0.9 MPa it delivers 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel tie-rod slots to detect piston position without any modification to the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X365S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.