Airtac SC80 Standard Cylinder SC80X380
The AirTAC SC80 Standard Cylinder SC80X380 is a genuine double-acting standard air cylinder with a Ø80mm bore and 380mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke380 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X380
The SC80X380 is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at 0.9 MPa operating pressure. With an 80 mm bore and 380 mm stroke, it uses a 25 mm diameter piston rod and an adjustable air cushion (28 mm length) to decelerate the load smoothly at end-of-travel.
This tie-rod cylinder has a compact body length A of 182 mm, making it shorter than an equivalent ISO 15552 profile. The standard PT3/8 port and M20x1.5 rod thread suit common pneumatic fittings, while the TPU seal handles ambient temperatures from -20 to +70 °C. It is a genuine AirTAC SC series unit built for reliable industrial actuation.
Airtac SC80 Standard Cylinder SC80X380 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X380 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 380 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X380
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×380 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X380 Is Used
Material Handling Gates
Actuates diverter gates or stops on conveyor lines. The 2513 N push force at 0.5 MPa reliably moves medium-weight packages, while the 380 mm stroke provides ample travel for wide belt systems.
Press & Clamping Fixtures
Delivers up to 4523 N of clamping force at 0.9 MPa for woodworking or light metal fabrication jigs. The adjustable cushion protects tooling by softening the impact at the end of the 380 mm advance.
Palletizing Pushers
Pushes cartons or trays onto pallets with consistent force. The 25 mm rod and tie-rod construction handle the repetitive, high-cycle demands of end-of-line packaging stations.
Is the Airtac SC80 Standard Cylinder SC80X380 the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N (80 mm push at 0.5 MPa) and 4523 N (at 0.9 MPa). If you need more force, step up to the SC100 bore which provides 3927 N at 0.5 MPa; for a lighter, more compact solution, the SC63 bore delivers 1559 N at 0.5 MPa. For this 380 mm stroke, ensure the load is guided externally if any side forces are present—the 25 mm rod can experience bending under unsupported side loads at extended lengths. A guided cylinder or external linear rail is recommended.
For direct replacement, match five key points: 80 mm bore, 380 mm stroke, PT3/8 port thread, basic mounting (no accessory bracket), and no magnet. This cylinder is not dimensionally interchangeable with ISO 15552 cylinders; it replaces another AirTAC SC80 tie-rod unit of identical specification.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X380 FAQ
The theoretical push force at 0.5 MPa is 2513 N, and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. These values assume clean, filtered air at the specified pressure and do not account for system friction losses.
No. The SC series is a tie-rod cylinder with a shorter overall body length (A=182 mm for the 80 bore) than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC80 cylinder with matching bore, stroke, port thread, and mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X380
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.