Airtac SC80 Standard Cylinder SC80X460S
The AirTAC SC80 Standard Cylinder SC80X460S is a genuine double-acting standard air cylinder with a Ø80mm bore and 460mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke460 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X460S
The SC80X460S is a double-acting single-rod pneumatic cylinder delivering 2513 N push and 2268 N pull at 0.5 MPa. With an 80 mm bore and a 460 mm stroke, it suits medium-force automation tasks that require a moderate reach. The 25 mm diameter piston rod and 28 mm adjustable air cushion help manage end-of-stroke deceleration smoothly.
A built-in magnet (the -S suffix) allows CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for non-contact position sensing. The cylinder uses PT1/8 ports and standard TPU seals rated for -20 to +70 °C. Its body length A is 182 mm, giving a total extended length of approximately 642 mm.
Airtac SC80 Standard Cylinder SC80X460S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X460S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 460 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X460S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×460 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X460S Is Used
Material Handling Pusher
The 2513 N push force at 0.5 MPa and 460 mm stroke are ideal for diverting medium-weight boxes or totes off a conveyor line, with sensors confirming full extension and retraction.
Clamping & Assembly Fixtures
Provides a controlled 2268 N pull force for clamping parts during welding or assembly. The built-in magnet enables precise end-of-stroke detection for automated cycle start.
Bin Tilter or Gate Actuator
The 460 mm stroke can tilt a bin or open a large hopper gate. The adjustable cushion absorbs the kinetic energy of the moving load, reducing noise and mechanical shock.
Is the Airtac SC80 Standard Cylinder SC80X460S the Right Cylinder?
Choose the SC80 bore when your application needs roughly 2500 N of push force at 0.5 MPa. If you require more force, step up to the SC100 (3927 N at 0.5 MPa); for a lighter, more compact solution, the SC63 delivers 1559 N. At a 460 mm stroke, the unsupported rod length is significant—ensure the load is guided externally or consider a guided cylinder to prevent rod bending and premature bearing wear under side load.
For a direct replacement, match these five points: 80 mm bore, 460 mm stroke, PT1/8 port thread, the built-in magnet (-S) for sensor mounting, and the basic (no bracket) mounting configuration. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to another AirTAC SC80 of the same stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X460S FAQ
At the standard operating pressure of 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Yes. The -S suffix in SC80X460S designates a built-in magnetic piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder's tie-rods without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X460S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.