Airtac SC80 Standard Cylinder SC80X465
The AirTAC SC80 Standard Cylinder SC80X465 is a genuine double-acting standard air cylinder with a Ø80mm bore and 465mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke465 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X465
The SC80X465 is an 80 mm bore double-acting pneumatic cylinder offering a 465 mm standard stroke. At 0.5 MPa it provides 2513 N push force and 2268 N pull force, driven by a 25 mm diameter piston rod for robust linear motion.
This tie-rod cylinder uses PT3/8 ports and features an adjustable air cushion (28 mm length) to decelerate the piston smoothly at stroke ends. The body length A is 182 mm, yielding a total extended length of approximately 647 mm. It operates from -20 to +70 °C with standard TPU seals.
Airtac SC80 Standard Cylinder SC80X465 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X465 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 465 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X465
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×465 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X465 Is Used
Material Transfer
Pushes heavy totes or pallets off a conveyor line. The 2513 N force at 0.5 MPa easily handles loaded containers in distribution centers.
Clamping & Fixturing
Applies consistent clamping pressure for woodworking or metal fabrication jigs. The adjustable cushion reduces vibration on the workpiece at the end of the 465 mm stroke.
Grain Chute Diverter
Actuates a diverter gate on a grain handling chute. The tie-rod construction withstands dusty agricultural environments when properly filtered air is supplied.
Is the Airtac SC80 Standard Cylinder SC80X465 the Right Cylinder?
For applications needing more force, stepping up to the 100 mm bore SC100 series provides 3927 N push at 0.5 MPa. If a shorter, more compact cylinder is acceptable, the 63 mm bore SC63 delivers 1559 N at the same pressure. At a 465 mm stroke, ensure side loads are minimal or use an external guide; the 25 mm rod can experience bending under significant lateral force.
To replace an existing unit, match five points: 80 mm bore, 465 mm stroke, PT3/8 port thread, basic (no mounting accessory), and confirm whether a magnet is needed (this model has no built-in magnet). The SC is a tie-rod design, shorter than an ISO 15552 cylinder, so dimensional interchangeability is limited to other AirTAC SC80 tie-rod cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X465 FAQ
At the standard operating pressure of 0.5 MPa, the push force is 2513 N. At 0.7 MPa it reaches 3518 N, and at the maximum operating pressure of 0.9 MPa it delivers 4523 N of push force. The theoretical maximum at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder. It is not dimensionally interchangeable with ISO 15552 standards. It should replace another AirTAC SC80 tie-rod cylinder with matching bore, stroke, and port thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X465
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.