Airtac SC80 Standard Cylinder SC80X470CB
The AirTAC SC80 Standard Cylinder SC80X470CB is a genuine double-acting standard air cylinder with a Ø80mm bore and 470mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke470 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X470CB
The SC80X470CB is an 80 mm bore tie-rod cylinder with a 470 mm stroke, equipped with a rear double clevis (CB) mounting for articulated, pivoting applications. It delivers a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa, making it a robust actuator for medium-to-heavy linear tasks.
This double-acting cylinder features a 25 mm diameter piston rod with an M20x1.5 male thread and PT3/8 ports. The 28 mm adjustable air cushion at both ends decelerates the piston smoothly, reducing end-of-stroke impact. Its compact tie-rod body has a length A of 182 mm, resulting in a total extended length of approximately 652 mm.
Airtac SC80 Standard Cylinder SC80X470CB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X470CB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 470 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X470CB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×470 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X470CB Is Used
Agricultural Machinery
Operates chute deflectors and hopper gates on harvesters and spreaders, where the rear clevis mount allows the cylinder to pivot freely as the mechanism arcs.
Conveyor Diverters
Pushes high-speed diverters and sortation gates in material handling lines, using the 470 mm stroke to sweep packages across multiple conveyor lanes.
Pivoting Weld Fixtures
Clamps and positions heavy steel fabrications in welding jigs. The CB clevis mount accommodates the fixture's rotational movement, while the 4523 N max force holds parts firmly.
Is the Airtac SC80 Standard Cylinder SC80X470CB the Right Cylinder?
For applications requiring higher force, consider stepping up to the 100 mm bore SC100 series, which provides 3927 N at 0.5 MPa. For a lighter, more compact solution, the 63 mm bore offers 1559 N at the same pressure. With a 470 mm stroke, ensure the rod is adequately supported if significant side loads are present; long, unsupported strokes can cause rod bending and premature bearing wear, so an external guide or a guided cylinder may be necessary.
This model is a direct replacement for another AirTAC SC80X470CB cylinder. For a successful retrofit, match five key specifications: the 80 mm bore, the 470 mm stroke, the PT3/8 port thread, the CB rear double clevis mounting (part F-SC80CB), and the absence of a built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X470CB FAQ
The theoretical force at 0.5 MPa is 2513 N pushing out and 2268 N pulling in. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. These values are based on the 80 mm bore and 25 mm rod diameter.
Yes, this model comes with the CB (rear double clevis) mount, which is specifically designed for pivoting applications. The matching accessory part is F-SC80CB. It allows the cylinder body to articulate, preventing rod bending in mechanisms that move through an arc.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X470CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.