Airtac SC80 Standard Cylinder SC80X522
The AirTAC SC80 Standard Cylinder SC80X522 is a genuine double-acting standard air cylinder with a Ø80mm bore and 522mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke522 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X522
The AirTAC SC80X522 is a double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at 0.9 MPa). Its 25 mm diameter piston rod and 28 mm adjustable air cushion make it suitable for medium-duty linear tasks requiring a non-standard 522 mm stroke.
This model features a PT3/8 port and M20x1.5 rod thread. With a body length of 182 mm, the total extended length reaches 704 mm. The SC series is shorter than ISO 15552 cylinders, so dimensional interchangeability should be verified against existing tie-rod mounts.
Airtac SC80 Standard Cylinder SC80X522 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X522 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 522 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X522
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×522 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X522 Is Used
Conveyor Diverting
The 522 mm stroke and 2513 N force at 0.5 MPa effectively push packages or pallets off a main conveyor line onto a branch.
Press-Fit Assembly
Delivers 4523 N at 0.9 MPa for pressing bearings or bushings into housings, with an adjustable cushion to soften the impact at stroke end.
Bin Tipping
Provides the long 522 mm reach needed to tilt heavy bins or hoppers, with the 25 mm rod handling the pushing load.
Is the Airtac SC80 Standard Cylinder SC80X522 the Right Cylinder?
For applications needing slightly less force, the 63 mm bore SC63 series provides 1559 N at 0.5 MPa. If higher force is required, the 100 mm bore SC100 series offers 3927 N at the same pressure. This 522 mm stroke exceeds the standard maximum of 1500 mm for the 80 mm bore, classifying it as a made-to-order non-standard stroke.
At this stroke length, the piston rod is more susceptible to bending under side loads. An external guide rail or a guided cylinder configuration is recommended to protect the rod bearing and ensure reliable operation. When replacing, match bore, stroke, PT3/8 port thread, basic mounting, and the absence of a magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X522 FAQ
At 0.5 MPa, push force is 2513 N and pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
No, the maximum standard stroke for the 80 mm bore SC series is 1500 mm. A 522 mm stroke is a non-standard, made-to-order length. Ensure your design accommodates the 704 mm total extended length (182 mm body + 522 mm stroke).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X522
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.