Airtac SC80 Standard Cylinder SC80X532S
The AirTAC SC80 Standard Cylinder SC80X532S is a genuine double-acting standard air cylinder with a Ø80mm bore and 532mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke532 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X532S
The AirTAC SC80X532S is an 80 mm bore double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at the 0.9 MPa maximum operating pressure). Its 532 mm stroke suits medium-reach linear tasks, and the built-in magnet (-S suffix) lets you clamp CMSG/DMSG/EMSG reed or solid-state sensors directly onto the barrel for reliable end-of-stroke or mid-position sensing.
With a 25 mm diameter piston rod and a 28 mm adjustable air cushion at each end, this cylinder decelerates loads smoothly to reduce impact and noise. The body length A is 182 mm, giving a total extended length of approximately 714 mm. Operating on 30-800 mm/s filtered air, the SC80X532S uses PT1/8 ports and an M20x1.5 rod thread, making it a robust choice for general automation where position feedback is needed.
Airtac SC80 Standard Cylinder SC80X532S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X532S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 532 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X532S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×532 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X532S Is Used
Conveyor Diverter Gates
The 532 mm stroke pushes diverters or gates across wide conveyor sections, with magnetic sensors confirming open/closed positions to the PLC.
Automated Welding Fixtures
Clamps and positions parts in welding cells. The built-in magnet allows sensor feedback to verify clamp engagement before the robot arc starts.
Pallet Layer Pick-and-Place
Provides the long vertical or horizontal reach needed to transfer layers of boxes or trays between pallet stations in logistics hubs.
Is the Airtac SC80 Standard Cylinder SC80X532S the Right Cylinder?
For higher force at the same pressure, step up to the 100 mm bore SC100 series, which provides 3927 N at 0.5 MPa. If a shorter, more compact cylinder is acceptable, the 63 mm bore SC63 series offers 1559 N at 0.5 MPa. This 532 mm stroke is within the 1500 mm maximum standard stroke for the 80 mm bore. Because the 532 mm stroke is long relative to the 25 mm rod diameter, avoid direct side loading—use an external guide rail or rod-alignment coupler to prevent rod bending and premature bearing wear. When replacing, match five points: 80 mm bore, 532 mm stroke, PT port thread, the -S magnet option for sensor mounting, and the basic (no bracket) mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X532S FAQ
At 0.7 MPa (7 bar) supply pressure, the theoretical push force on the outstroke is 3518 N. The pull force on the retract stroke is 2268 N at the same 0.5 MPa pressure, due to the area taken up by the 25 mm rod.
Yes. The -S suffix in SC80X532S means a magnet is built into the piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors onto the barrel's sensor groove without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X532S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.