Airtac SC80 Standard Cylinder SC80X560S
The AirTAC SC80 Standard Cylinder SC80X560S is a genuine double-acting standard air cylinder with a Ø80mm bore and 560mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke560 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X560S
The AirTAC SC80X560S is a double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at 0.9 MPa). Its 25 mm diameter piston rod and 28 mm adjustable air cushion make it suitable for medium-duty linear tasks where end-of-stroke deceleration is required.
This model includes a built-in magnet, allowing CMSG/DMSG/EMSG sensors to mount directly on the barrel for rod-position feedback. With a 560 mm stroke and a body length A of 182 mm, the total extended length reaches approximately 742 mm. The standard PT1/8 port and TPU seals cover a -20 to +70 °C operating range.
Airtac SC80 Standard Cylinder SC80X560S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X560S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 560 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X560S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×560 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X560S Is Used
Material Handling Gates
The 560 mm stroke and 2513 N push force at 0.5 MPa operate diverters and stop gates on conveyor lines, with the magnet enabling end-of-stroke confirmation.
Press-Fit Assembly
Delivers up to 4523 N at 0.9 MPa for pressing bushings or bearings into housings. The adjustable cushion protects tooling from impact damage.
Palletising Pushers
Pushes boxes or trays onto pallets with a long 560 mm reach. The built-in magnet allows sensors to verify full extension and retraction for reliable automation.
Is the Airtac SC80 Standard Cylinder SC80X560S the Right Cylinder?
The SC80 bore sits between the lighter SC63 (1559 N at 0.5 MPa) and the heavier SC100 (3927 N at 0.5 MPa). If your load requires more than 2513 N of thrust, step up to the 100 mm bore; if you need a more compact body, the 63 mm bore may suffice. For this 560 mm stroke, side loads must be managed carefully—long unsupported rods can bend. Use an external guide or a guided cylinder if the load is not perfectly axial.
To replace an existing cylinder, match five points: 80 mm bore, 560 mm stroke, PT1/8 port thread, the built-in magnet (-S suffix), and the basic mounting style. This ensures direct compatibility with another AirTAC SC80 tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X560S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix indicates a built-in magnet. You can clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X560S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.