Airtac SC80 Standard Cylinder SC80X570
The AirTAC SC80 Standard Cylinder SC80X570 is a genuine double-acting standard air cylinder with a Ø80mm bore and 570mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke570 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X570
The SC80X570 is an 80 mm bore, 570 mm stroke double-acting tie-rod cylinder producing 2513 N of push force at 0.5 MPa. At its maximum operating pressure of 0.9 MPa, thrust reaches 4523 N, making it a robust choice for medium-to-heavy linear actuation tasks. The 25 mm diameter piston rod and 28 mm adjustable air cushion help manage end-of-stroke deceleration effectively across this 570 mm travel.
This model uses the standard TPU seal with an operating temperature range of -20 to +70 °C and PT3/8 threaded ports. The body length A is 182 mm, giving a total extended length of approximately 752 mm. As a genuine AirTAC SC series unit, it provides a compact tie-rod design that is shorter than a typical ISO 15552 cylinder of the same bore.
Airtac SC80 Standard Cylinder SC80X570 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X570 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 570 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X570
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×570 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X570 Is Used
Package Diverting
Provides the 570 mm stroke and 2513 N force at 0.5 MPa to reliably push cartons or totes off a main conveyor line onto a spur, with the adjustable cushion softening the shift impact.
Press-Fit Assembly
Delivers up to 4523 N at 0.9 MPa for pressing bearings or bushings into housings. The 25 mm rod and tie-rod construction offer stable, repeatable alignment in assembly fixtures.
Pallet Layer Forming
Actuates a stop gate or pusher plate across a 570 mm span to align cases on a pallet layer, leveraging the cylinder's high force capacity to handle heavy stacked loads.
Is the Airtac SC80 Standard Cylinder SC80X570 the Right Cylinder?
For applications needing more force, stepping up to the 100 mm bore SC100 series provides 3927 N at 0.5 MPa. If space is tighter and the load is lighter, the 63 mm bore SC63 series delivers 1559 N at the same pressure. At a 570 mm stroke, ensure the rod is not subjected to significant side loading; an external guide rail or a guided cylinder is recommended to protect the rod bearing and piston seals from premature wear.
When replacing this cylinder, match five key points: 80 mm bore, 570 mm stroke, PT3/8 port thread, the specific mounting accessory (this is a basic body, so confirm if your application needs an LB, FA, FB, CA, CB, or TC bracket), and the magnet option (this model has no built-in magnet).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X570 FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is physically shorter than an ISO 15552 profile cylinder of the same bore and stroke, so mounting dimensions and body length will differ. It is a direct replacement only for another AirTAC SC80 tie-rod cylinder with matching stroke, port thread, mounting, and magnet options.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X570
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.