Airtac SC80 Standard Cylinder SC80X570S
The AirTAC SC80 Standard Cylinder SC80X570S is a genuine double-acting standard air cylinder with a Ø80mm bore and 570mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke570 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X570S
The SC80X570S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining an 80 mm bore with a 570 mm stroke. At 0.5 MPa air pressure it generates 2513 N of push force and 2268 N of pull force, driven by a 25 mm diameter piston rod with M20x1.5 male threads. The built-in magnet allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for reliable end-of-stroke detection.
This model features a body length A of 182 mm and an adjustable air cushion length of 28 mm at each end, helping to decelerate the piston smoothly. The standard PT1/4 port thread and TPU seals provide a working temperature range of -20 to +70 °C. With a 570 mm stroke, the extended length reaches approximately 752 mm, making it well-suited for medium-reach material transfer and clamping tasks where sensor feedback is essential.
Airtac SC80 Standard Cylinder SC80X570S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X570S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 570 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X570S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×570 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X570S Is Used
Conveyor Diverter Gates
The 570 mm stroke and 2513 N push force at 0.5 MPa efficiently actuate diverter gates on medium-width conveyors. The built-in magnet provides sensor feedback to confirm gate position for automated sortation control.
Automated Welding Fixtures
Clamps and positions weldments with 2268 N of pull force. The 25 mm rod diameter handles the repetitive clamping loads, while magnetic sensors verify clamp closure before the welding cycle starts.
Pallet Stop and Lift Stations
Raises or stops pallets on gravity roller lanes. The 28 mm adjustable air cushion decelerates the load smoothly at the end of the 570 mm lift stroke, preventing shock to the pallet and frame.
Is the Airtac SC80 Standard Cylinder SC80X570S the Right Cylinder?
When selecting an SC cylinder, match the bore to your force requirement at your available plant pressure. The SC80 delivers 2513 N push at 0.5 MPa; if you need less force, stepping down to the SC63 bore provides 1559 N at the same pressure, while moving up to the SC100 bore offers 3927 N. For this 570 mm stroke, the 25 mm rod is robust, but any significant side load should be managed with an external linear guide or a guided cylinder to prevent rod bearing wear and bending.
For a direct replacement, match five key points: 80 mm bore, 570 mm stroke, PT port thread, the built-in magnet (-S suffix), and the basic mounting configuration. This cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders. The -S suffix ensures compatibility with your existing AirTAC magnetic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X570S FAQ
At 0.7 MPa operating pressure, this 80 mm bore cylinder generates 3518 N of push force on extension and 3170 N of pull force on retraction. The maximum theoretical force at 1.0 MPa is 513 kgf (5020 N push).
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder (body length A is 182 mm for the 80 bore). It is not dimensionally interchangeable. Only replace another AirTAC SC tie-rod cylinder with matching bore, stroke, port thread, magnet option, and mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X570S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.