Airtac SC80 Standard Cylinder SC80X575S
The AirTAC Airtac SC80 Standard Cylinder SC80X575S is a genuine double-acting standard air cylinder with a Ø80mm bore and 575mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke575 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X575S
The SC80X575S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining an 80 mm bore with a 575 mm stroke. At 0.5 MPa it generates 2513 N of push force, and the 25 mm diameter piston rod with PT3/8 ports provides a robust platform for mid-range automation tasks.
This model includes the factory-installed -S magnet, allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing. With a 28 mm adjustable air cushion at each end and a body length A of 182 mm, the total extended length reaches approximately 757 mm, making it suitable for applications needing precise end-of-stroke deceleration over a long travel.
Airtac SC80 Standard Cylinder SC80X575S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X575S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 575 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X575S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×575 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X575S Is Used
Long-Stroke Part Transfer
The 575 mm stroke and 2513 N push force efficiently shift pallets or components between distant conveyor stations. The built-in magnet enables precise end-of-travel confirmation with barrel-mounted sensors.
Automated Clamping & Fixturing
Delivers consistent clamping force for large workpieces in CNC or welding fixtures. The adjustable cushioning protects the tooling from impact at the end of the 575 mm stroke, maintaining fixture alignment.
Diverting & Sorting Gates
Operates high-reach diverter gates in logistics systems. The 28 mm cushion length absorbs kinetic energy smoothly, while the -S magnet provides open/closed gate status feedback to the central controller.
Is the Airtac SC80 Standard Cylinder SC80X575S the Right Cylinder?
Choose the SC80 bore when your load requires the 2513 N push force at 0.5 MPa—a significant step up from the 1559 N of the SC63. If your application demands even higher force, the SC100 bore delivers 3927 N at the same pressure. For this 575 mm stroke, ensure the rod is protected from side loads; long unsupported strokes on a 25 mm rod can experience bending under lateral forces, so consider an external guide rail or a guided cylinder if off-axis loads are present.
When replacing an existing cylinder, match five key points: 80 mm bore, 575 mm stroke, PT3/8 port thread, the built-in magnet for sensor compatibility, and the basic mounting style. This SC model is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X575S FAQ
At the standard operating pressure of 0.5 MPa, this cylinder provides 2513 N of push force and 2268 N of pull force. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Yes, the -S suffix in the model code SC80X575S indicates a built-in magnet on the piston. This allows you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder's tie-rod barrel to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X575S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.