Airtac SC80 Standard Cylinder SC80X600S
The AirTAC Airtac SC80 Standard Cylinder SC80X600S is a genuine double-acting standard air cylinder with a Ø80mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X600S
The SC80X600S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining an 80 mm bore with a 600 mm stroke. It generates a push force of 2513 N at 0.5 MPa and 4523 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod.
This model includes a built-in magnet, allowing easy mounting of CMSG, DMSG, or EMSG reed and solid-state sensors directly onto the barrel for precise position feedback. The adjustable air cushion at both ends, with a 28 mm cushion length, decelerates the piston smoothly to reduce end-of-stroke impact. The total extended body length is approximately 782 mm.
Airtac SC80 Standard Cylinder SC80X600S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X600S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X600S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X600S Is Used
Material Transfer
Pushes or diverts boxes and packages on a conveyor line with 2513 N of force at standard shop air, with sensors confirming each cycle.
Clamping & Fixturing
Provides strong, consistent clamping pressure for woodworking or metal fabrication jigs, with magnetic piston sensing for automated sequence control.
Bin Tipping
Actuates a bin or hopper tipping mechanism with the 4523 N maximum thrust, using the adjustable cushion to handle the shifting load smoothly.
Is the Airtac SC80 Standard Cylinder SC80X600S the Right Cylinder?
Select the SC80 bore when your application requires between 2513 N and 4523 N of force. If your load is lighter, consider stepping down to the SC63 bore, which provides 1559 N at 0.5 MPa, to save on air consumption and physical space. For higher forces, the SC100 bore delivers 3927 N at the same pressure.
For this 600 mm stroke, ensure the load is guided and side forces are minimized. A long, unsupported 25 mm rod can be susceptible to bending under lateral loads; use an external guide rail or a guided cylinder if side loading is present. When replacing an existing cylinder, match these five points exactly: 80 mm bore, 600 mm stroke, PT port thread, the basic mounting configuration, and the built-in magnet (-S suffix).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X600S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Yes. The -S suffix in the model code indicates a built-in magnet. This allows you to attach AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly to the cylinder barrel's sensor groove for end-of-stroke or mid-stroke position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.