Airtac SC80 Standard Cylinder SC80X605S
The AirTAC Airtac SC80 Standard Cylinder SC80X605S is a genuine double-acting standard air cylinder with a Ø80mm bore and 605mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke605 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X605S
The AirTAC SC80X605S is a double-acting single-rod pneumatic cylinder with an 80 mm bore and a 605 mm non-standard stroke, delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. Its 25 mm diameter piston rod and 28 mm adjustable air cushion provide robust end-of-stroke deceleration, while the built-in magnet (-S suffix) allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the tie-rod barrel for precise position feedback.
This cylinder is built on the proven AirTAC SC tie-rod platform, which is shorter than an ISO 15552 profile and not dimensionally interchangeable with it. The extended body length for this model is approximately 787 mm (body length A of 182 mm plus the 605 mm stroke). The standard PT1/8 port and M20x1.5 rod thread ensure straightforward pneumatic connections, and the operating temperature range with the default TPU seals is -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X605S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X605S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 605 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X605S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×605 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X605S Is Used
Material Handling & Sorting
The 605 mm stroke and 2513 N push force at 0.5 MPa are ideal for long-reach diverters, pushers, and transfer stations on packaging or logistics lines, with the built-in magnet enabling sensor-based end-of-stroke confirmation.
Automated Assembly Fixtures
Delivers consistent clamping and pressing force for large-part assembly jigs. The adjustable cushion protects tooling at the end of the 605 mm travel, while CMSG sensors verify the jaw position for quality control.
Palletizing & Depalletizing
Provides the long reach needed to push or align heavy boxes and pallets. The 4523 N maximum thrust at 0.9 MPa handles demanding load-shifting tasks in automated warehouse cells.
Is the Airtac SC80 Standard Cylinder SC80X605S the Right Cylinder?
Choose the SC80X605S when your application requires a mid-range force of about 2513 N at standard shop air pressure. If you need a more compact cylinder for lower loads, the SC63 series provides 1559 N of push force at 0.5 MPa from a 63 mm bore. For heavier pressing or clamping tasks, stepping up to the SC100 bore delivers 3927 N at the same pressure.
This cylinder has a non-standard stroke of 605 mm. For any stroke of 300 mm or more, especially with a 25 mm rod, you must manage side loads carefully to prevent rod bending or bearing damage. Use an external guide rail or a guided cylinder assembly if the load is not perfectly axial. For a direct replacement, match five key points: the 80 mm bore, the 605 mm stroke, the PT port thread, the built-in magnet (-S), and the basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X605S FAQ
At the standard operating pressure of 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No, the AirTAC SC series is a tie-rod cylinder that is shorter than an ISO 15552 cylinder, so it is not dimensionally interchangeable. To guarantee a drop-in replacement, match the 80 mm bore, 605 mm stroke, PT1/8 port thread, basic mounting, and the built-in magnet (-S) for sensor compatibility.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X605S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.