Airtac SC80 Standard Cylinder SC80X60S
The AirTAC SC80 Standard Cylinder SC80X60S is a genuine double-acting standard air cylinder with a Ø80mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X60S
The SC80X60S is an 80 mm bore double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa (up to 4523 N at 0.9 MPa). Its 60 mm stroke is well within the standard range, making it a compact workhorse for short linear moves where a 25 mm diameter rod provides excellent rigidity against side loads.
This model includes the factory-fitted -S magnet embedded in the piston, enabling direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for contactless end-of-stroke detection. The adjustable air cushion at both ends (28 mm length) decelerates the piston smoothly, reducing noise and vibration in high-cycle applications.
Airtac SC80 Standard Cylinder SC80X60S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X60S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X60S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X60S Is Used
Packaging Line Diverter
The 60 mm stroke and 25 mm rod provide a fast, stiff push to divert cartons off a conveyor. The built-in magnet allows sensor-confirmed retraction before the next cycle.
Clamping & Fixturing
Delivers up to 4523 N at 0.9 MPa to hold workpieces during machining. The adjustable cushion protects the fixture from impact, and the -S magnet confirms clamp engagement.
Pallet Stop Gate
Short, powerful stroke ideal for raising and lowering a stop blade at a pallet station. The tie-rod design handles the repetitive impact loads reliably in dusty environments.
Is the Airtac SC80 Standard Cylinder SC80X60S the Right Cylinder?
Choose the SC80 when your application needs roughly 2500 N of force at standard plant air pressure. If you can accept a smaller footprint and about 1560 N, step down to the SC63 bore; for heavier loads near 3900 N, the SC100 bore is the next logical step. This 60 mm stroke model is a stock standard length.
For replacement, match five key points: 80 mm bore, 60 mm stroke, PT1/4 port thread, the built-in magnet (-S suffix), and your required mounting accessory (this unit is basic, without brackets). Always verify the port thread type—PT is standard here, but G thread versions exist.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X60S FAQ
At 0.5 MPa, the push force is 2513 N and pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix in the model code indicates a built-in magnet. You can clamp compatible AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel's tie-rod slots for non-contact position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.