Airtac SC80 Standard Cylinder SC80X60SFB
The AirTAC Airtac SC80 Standard Cylinder SC80X60SFB is a genuine double-acting standard air cylinder with a Ø80mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X60SFB
The SC80X60SFB is an 80 mm bore double-acting pneumatic cylinder delivering a push force of 2513 N at 0.5 MPa (4523 N at 0.9 MPa). Its 60 mm stroke suits short clamping, pressing, or ejecting operations where space is limited but high force is essential. This model includes a built-in magnet for barrel-mounted sensors and a rear rectangular flange (FB) for rigid end-face mounting.
The 25 mm diameter piston rod and 28 mm adjustable air cushion provide smooth deceleration at end-of-stroke, protecting tooling from impact. With a body length A of 182 mm, the total extended length is approximately 242 mm. The PT1/4 port supplies filtered air, and the TPU seal operates reliably from -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X60SFB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X60SFB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X60SFB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X60SFB Is Used
Short-Stroke Clamping
The 60 mm stroke and 2513 N force at 0.5 MPa make this cylinder ideal for pneumatic clamping fixtures in machining centers, where rapid, high-force clamping is needed in a compact envelope.
Product Rejection Gates
With its rear flange mount and sensor-ready magnet, this cylinder reliably actuates high-speed diverter gates on conveyor lines, sorting heavy packages with consistent, monitored stroke confirmation.
Die Cushion Actuation
The robust 25 mm rod and 4523 N peak thrust at 0.9 MPa suit short-stroke die cushion pins in metal stamping presses, providing controlled, repeatable resistance force.
Is the Airtac SC80 Standard Cylinder SC80X60SFB the Right Cylinder?
Choose the SC80 bore when your application needs around 2513 N of push force at standard plant pressure. If you need less force, stepping down to the SC63 bore provides 1559 N at 0.5 MPa. For higher force, the SC100 bore delivers 3927 N at the same pressure. The 60 mm stroke is well within the 1500 mm maximum standard stroke for this bore, so no special stroke considerations apply.
To replace an existing cylinder, match five points: 80 mm bore, 60 mm stroke, PT1/4 port thread, the FB rear flange mounting (accessory F-SC80FB), and the -S magnet for sensor compatibility. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X60SFB FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 cylinder. It is not dimensionally interchangeable. For replacement, match another AirTAC SC tie-rod cylinder with an 80 mm bore, 60 mm stroke, PT port, FB mount, and magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X60SFB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.