Airtac SC80 Standard Cylinder SC80X610
The AirTAC Airtac SC80 Standard Cylinder SC80X610 is a genuine double-acting standard air cylinder with a Ø80mm bore and 610mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke610 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X610
The AirTAC SC80X610 is a double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. With an 80 mm bore and a 610 mm stroke, this model uses a 25 mm diameter piston rod with an M20x1.5 male thread and PT3/8 ports, making it a robust linear drive for medium-to-long travel applications.
This cylinder features an adjustable pneumatic cushion at each end (28 mm cushion length) to decelerate the piston smoothly, reducing end-of-stroke impact. The body length A is 182 mm, giving a total extended length of approximately 792 mm. As a genuine AirTAC SC series unit, it is designed for reliable filtered-air operation from 0.15 to 1.0 MPa and is shorter than a comparable ISO 15552 cylinder.
Airtac SC80 Standard Cylinder SC80X610 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X610 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 610 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X610
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×610 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X610 Is Used
Long-Stroke Part Transfer
The 610 mm stroke moves components between distant conveyor stations or work cells. The 2513 N force at 0.5 MPa handles heavy pallets or engine blocks reliably.
Press-Feed Automation
Pushes sheet metal or composite blanks into a stamping press. The adjustable cushion protects tooling by softly decelerating the 80 mm bore piston at the end of its travel.
Bin Diverter Gate Actuation
Operates a large diverter gate in a gravity chute or sorting system. The tie-rod construction withstands the repetitive impact and dusty conditions of bulk material handling.
Is the Airtac SC80 Standard Cylinder SC80X610 the Right Cylinder?
Select the SC80 bore when your application needs between 2513 N and 4523 N of force. If your load requires less force, stepping down to the SC63 bore (1559 N at 0.5 MPa) can reduce air consumption and physical size. For higher force demands, the SC100 bore provides 3927 N at 0.5 MPa.
For this 610 mm stroke, carefully evaluate side-loading conditions. A long, unsupported 25 mm rod is susceptible to bending under lateral forces; use an external linear guide or rod-alignment coupler to protect the rod bearing and seals. When replacing this cylinder, match five key points: 80 mm bore, 610 mm stroke, PT3/8 port thread, basic (no) mounting, and the absence of a built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X610 FAQ
At 0.7 MPa operating pressure, the theoretical push force is 3518 N and the pull force on the retract stroke is 2268 N. For maximum force, operate at 0.9 MPa to achieve 4523 N push.
This specific model code does not include the '-S' magnet option, so the piston does not have a built-in magnetic ring. To use CMSG or DMSG sensors for position feedback, you would need to order the SC80X610-S variant, which includes the magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X610
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.