Airtac SC80 Standard Cylinder SC80X613
The AirTAC Airtac SC80 Standard Cylinder SC80X613 is a genuine double-acting standard air cylinder with a Ø80mm bore and 613mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke613 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X613
The AirTAC SC80X613 is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa, scaling up to a substantial 4523 N at the maximum operating pressure of 0.9 MPa. Its 25 mm diameter piston rod and 28 mm adjustable air cushion are engineered for reliable mid-range industrial automation tasks requiring a stroke just over half a meter.
This 80 mm bore model features a body length of 182 mm, resulting in a total extended length of approximately 795 mm. The PT3/8 port and M20x1.5 rod thread provide robust connections, while the standard TPU seals ensure dependable operation within a -20 to +70 C temperature range.
Airtac SC80 Standard Cylinder SC80X613 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X613 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 613 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X613
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×613 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X613 Is Used
Material Transfer
Provides the 2513 N push force needed to shift pallets or product bins across a 613 mm span on a conveyor transfer station.
Farm Equipment Actuation
Operates chutes or gates on agricultural machinery, where the robust tie-rod design and 4523 N max force handle dusty, high-cycle conditions.
Press Feed Mechanism
Delivers consistent, controlled motion to feed sheet material into a stamping press, utilizing the adjustable cushion to manage the 613 mm stroke end-impact.
Is the Airtac SC80 Standard Cylinder SC80X613 the Right Cylinder?
For applications needing slightly less force, the 63 mm bore SC63 series provides 1559 N at 0.5 MPa, while stepping up to the 100 mm bore SC100 offers 3927 N for heavier loads. This SC80X613 model uses a basic mount, PT threads, and has no magnet, so any replacement must match these exact specifications: bore, stroke, port type, and the absence of a magnetic piston.
Given the 613 mm stroke, careful consideration of side loads is critical. The unsupported piston rod can be subject to bending moments if not guided externally. For such applications, pairing this cylinder with an external linear guide or considering a guided cylinder assembly is recommended to prevent premature seal and bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X613 FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
No, the SC80X613 is not designed for unguided side loads. The long, unsupported 25 mm rod is susceptible to bending. You must use an external guide rail or choose a guided cylinder configuration to protect the rod bearings and seals from damage.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X613
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.