Airtac SC80 Standard Cylinder SC80X700SCA
The AirTAC Airtac SC80 Standard Cylinder SC80X700SCA is a genuine double-acting standard air cylinder with a Ø80mm bore and 700mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke700 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X700SCA
The AirTAC SC80X700SCA is a double-acting pneumatic cylinder delivering 2513 N push force at 0.5 MPa (4523 N at 0.9 MPa). Its 80 mm bore and 700 mm stroke suit mid-range linear tasks needing a long travel with a 25 mm diameter piston rod.
This model includes a built-in magnet (-S) for barrel-mounted CMSG/DMSG/EMSG sensors and a rear single clevis mount (CA, part F-SC80CA) for pivoting applications. The tie-rod construction keeps the body length A compact at 182 mm, with a 28 mm adjustable air cushion to decelerate the piston smoothly.
Airtac SC80 Standard Cylinder SC80X700SCA Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X700SCA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X700SCA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X700SCA Is Used
Conveyor Diverters
The 700 mm stroke and rear clevis mount allow the cylinder to pivot while pushing diverters or gates across wide conveyor lines.
Agricultural Machinery
Provides long-travel linear actuation for chute controls or bin gates, with sensor-ready position feedback via the built-in magnet.
Material Handling Pushers
Delivers 2513 N at 0.5 MPa to push heavy workpieces off a line, with adjustable cushioning to protect the assembly at end-of-stroke.
Is the Airtac SC80 Standard Cylinder SC80X700SCA the Right Cylinder?
Choose the SC80 when the SC63's 1559 N push at 0.5 MPa is insufficient; step up to the SC100 (3927 N at 0.5 MPa) if higher force is needed. For this 700 mm stroke, ensure the rod is guarded against side loads—an external linear guide or a guided cylinder is recommended to prevent rod bending and premature bearing wear.
For direct replacement, match bore (80 mm), stroke (700 mm), PT port thread, rear clevis mount (CA), and the built-in magnet (-S). This SC tie-rod cylinder is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X700SCA FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 cylinder. For a correct replacement, match the bore, stroke, PT port, rear clevis mount, and built-in magnet configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X700SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.