Airtac SC80 Standard Cylinder SC80X710
The AirTAC Airtac SC80 Standard Cylinder SC80X710 is a genuine double-acting standard air cylinder with a Ø80mm bore and 710mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke710 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X710
The AirTAC SC80X710 is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at 0.9 MPa), making it a strong mid-range actuator for industrial linear motion. With an 80 mm bore, 25 mm piston rod, and a 710 mm stroke, the total extended body length reaches approximately 892 mm, providing ample reach for material handling and positioning tasks.
This tie-rod cylinder features an adjustable air cushion (28 mm) at both ends to decelerate the piston smoothly, reducing end-of-stroke impact. It operates on filtered air (40 µm) at 0.15–1.0 MPa and uses standard TPU/NBR seals for a temperature range of -20 to +70 °C. The PT3/8 port and M20x1.5 rod thread ensure straightforward pneumatic connections.
Airtac SC80 Standard Cylinder SC80X710 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X710 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 710 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X710
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×710 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X710 Is Used
Conveyor Diverting
The 710 mm stroke and 2513 N push force at 0.5 MPa reliably actuates diverter gates on medium-duty package and pallet conveyor lines.
Press Feeding
Delivers consistent 4523 N thrust at 0.9 MPa to push blanks or components into stamping presses, with the adjustable cushion protecting tooling.
Pallet Layer Positioning
Moves pallet layers or slip sheets across 710 mm in automated palletizing cells, where the 25 mm rod provides good column strength for axial loads.
Is the Airtac SC80 Standard Cylinder SC80X710 the Right Cylinder?
For applications needing more force, stepping up to the SC100 bore provides 3927 N at 0.5 MPa, while the SC63 offers 1559 N if a smaller footprint is required. At a 710 mm stroke, the 25 mm rod is subject to bending under side loads; always use an external linear guide or rod-alignment coupler to protect the rod bearing and extend seal life.
When replacing an existing cylinder, match five key points: 80 mm bore, 710 mm stroke, PT3/8 port thread, the specific mounting accessory (this basic model has no bracket), and confirm whether a magnet is needed (this model has none). The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X710 FAQ
At 0.7 MPa (7 bar), the SC80X710 produces 3518 N of push force and 2268 N of pull force on the retract stroke, based on the official AirTAC thrust table for the 80 mm bore.
No. The SC80 is a tie-rod cylinder with a shorter body length (A=182 mm) than an equivalent ISO 15552 profile cylinder. It is not dimensionally interchangeable. Only replace with another AirTAC SC80 tie-rod cylinder matching the 710 mm stroke, PT3/8 port, and mounting style.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X710
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.