Airtac SC80 Standard Cylinder SC80X715
The AirTAC Airtac SC80 Standard Cylinder SC80X715 is a genuine double-acting standard air cylinder with a Ø80mm bore and 715mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke715 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X715
The SC80X715 is a double-acting pneumatic cylinder delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at the 0.9 MPa maximum operating pressure. Its 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide reliable deceleration for the 715 mm stroke, making it a robust choice for medium-to-heavy linear tasks.
This tie-rod cylinder uses a PT3/8 port and M20x1.5 rod thread. With a body length A of 182 mm, the total extended length reaches approximately 897 mm. The standard TPU seals suit ambient temperatures from -20 to +70 °C, and the design accepts filtered air at 40 µm for long service life.
Airtac SC80 Standard Cylinder SC80X715 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X715 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 715 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X715
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×715 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X715 Is Used
Pallet Transfer
The 715 mm stroke and 2513 N push force at 0.5 MPa reliably shift heavy pallets between conveyor lanes in packaging and logistics hubs.
Woodworking Clamp
Applies consistent clamping pressure across wide glue-up tables. The adjustable cushion prevents impact damage to jigs at the end of the long 715 mm stroke.
Press Feed Ejector
Ejects formed parts from a stamping press bed. The 25 mm rod and tie-rod construction handle the repetitive impact and side-load conditions when guided.
Is the Airtac SC80 Standard Cylinder SC80X715 the Right Cylinder?
Select the SC80 when your application needs around 2513 N of push force at standard plant pressure. If the load is lighter, stepping down to the SC63 bore (1559 N at 0.5 MPa) can reduce air consumption and physical size. For heavier demands, the SC100 bore provides 3927 N at the same 0.5 MPa pressure.
At a 715 mm stroke, the extended rod is susceptible to bending under side loads. Always guide the load externally with a linear rail or rod, or consider a guided cylinder if side forces are unavoidable. For a direct replacement, match five points exactly: 80 mm bore, 715 mm stroke, PT3/8 port thread, basic mounting (no bracket), and confirm the magnet option is absent.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X715 FAQ
At 0.7 MPa operating pressure, the SC80 bore generates a theoretical push force of 3518 N and a pull force of 2268 N. For maximum force, the cylinder can operate at up to 1.0 MPa, delivering 4523 N push.
It is not recommended. The 25 mm diameter rod extended to 715 mm is vulnerable to bending and bearing wear if side loads are present. Always use an external guide rail or rod support to ensure linear motion and extend seal life.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X715
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.