Airtac SC80 Standard Cylinder SC80X722S
The AirTAC Airtac SC80 Standard Cylinder SC80X722S is a genuine double-acting standard air cylinder with a Ø80mm bore and 722mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke722 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X722S
The AirTAC SC80X722S is a double-acting single-rod pneumatic cylinder with an 80 mm bore and a 722 mm stroke, built on a rugged tie-rod design that is shorter than an ISO 15552 profile. It produces 2513 N of push force at 0.5 MPa and 4523 N at the maximum operating pressure of 0.9 MPa, making it a strong mid-range actuator for linear motion tasks.
This model includes a built-in magnet (suffix -S) that allows CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly on the barrel for non-contact position sensing. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end help manage deceleration, while the PT3/8 port thread provides standard pneumatic connections.
Airtac SC80 Standard Cylinder SC80X722S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X722S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 722 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X722S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×722 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X722S Is Used
Material Handling Pusher
The 722 mm stroke and 2513 N push force at 0.5 MPa are well-suited for transferring boxes or totes between conveyor lanes, with the built-in magnet providing end-of-stroke confirmation.
Automated Assembly Feed
Delivers consistent linear motion for feeding parts into an assembly nest, where the adjustable cushion protects tooling at the end of the 722 mm travel.
Palletizing Arm Actuator
Provides the long reach needed for a layer-forming arm on a palletizer, with the -S magnet enabling mid-stroke deceleration sensing via external switches.
Is the Airtac SC80 Standard Cylinder SC80X722S the Right Cylinder?
Choose the SC80 when your application needs roughly 2513 N of push force at standard plant pressure; stepping down to a 63 mm bore drops that to 1559 N, while moving up to a 100 mm bore raises it to 3927 N. For this 722 mm stroke, confirm that side loads are minimal or use an external guide rail, as a long unsupported rod can experience bending stress on the rod bearing.
When replacing an existing cylinder, match five points: 80 mm bore, 722 mm stroke, PT3/8 port thread, the built-in magnet for sensor compatibility, and the basic (no-bracket) mounting style. The SC is a tie-rod cylinder, so it is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X722S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix means a magnet is built into the piston, so you can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position without any modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X722S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.