Airtac SC80 Standard Cylinder SC80X750SLB
The AirTAC Airtac SC80 Standard Cylinder SC80X750SLB is a genuine double-acting standard air cylinder with a Ø80mm bore and 750mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke750 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X750SLB
The SC80X750SLB is an 80 mm bore, 750 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It generates a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa, making it a solid mid-range actuator for industrial linear motion.
This configuration includes a built-in magnet (-S) for mounting CMSG/DMSG/EMSG sensors directly on the barrel, and LB foot mounting (accessory F-SC80LB) for secure axial surface installation. The 25 mm diameter piston rod and 28 mm adjustable air cushion help manage end-of-stroke deceleration, while the PT1/4 port threads ensure straightforward pneumatic connections.
Airtac SC80 Standard Cylinder SC80X750SLB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X750SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X750SLB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X750SLB Is Used
Material Handling & Sorting
The 2513 N push force at 0.5 MPa and 750 mm stroke are well-suited for diverting packages or pushing heavy totes on wide conveyor lines.
Press & Clamping Fixtures
Delivers up to 4523 N at 0.9 MPa for holding workpieces during welding or assembly, with the LB mount providing a stable, bolted-down base.
Palletising & Lift-Assist
The long 750 mm reach combined with the built-in magnet for end-of-stroke sensing enables reliable layer stacking and lift-assist mechanisms in automated warehouses.
Is the Airtac SC80 Standard Cylinder SC80X750SLB the Right Cylinder?
Choose the SC80 when your application needs more force than the SC63 (1559 N push at 0.5 MPa) but doesn't yet require the SC100 (3927 N push at 0.5 MPa). At a 750 mm stroke, the extended rod has significant unsupported length; side loads can cause rod bending or premature bearing wear, so consider an external guide or a guided cylinder if lateral forces are present.
For a drop-in replacement, match these five points: 80 mm bore, 750 mm stroke, PT port thread, LB foot mounting (F-SC80LB), and the -S magnet for sensor compatibility. The SC is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X750SLB FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 cylinder of the same bore and stroke. It is not dimensionally interchangeable. Replace only with another AirTAC SC80 tie-rod cylinder matching the bore, stroke, PT port, LB mount, and -S magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X750SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.