Airtac SC80 Standard Cylinder SC80X753STC
The AirTAC Airtac SC80 Standard Cylinder SC80X753STC is a genuine double-acting standard air cylinder with a Ø80mm bore and 753mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke753 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X753STC
The AirTAC SC80X753STC is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at 0.9 MPa. With an 80 mm bore and a 753 mm stroke, this model features a 25 mm diameter piston rod and an adjustable air cushion length of 28 mm to decelerate end-of-stroke impact.
This specific configuration includes a built-in magnet (-S) for mounting CMSG/DMSG/EMSG sensors directly on the tie-rod barrel, and a centre trunnion mount (TC) supplied with the TCM1 bracket (F-SC80TC). The trunnion allows the cylinder to pivot, making it ideal for swinging or articulating loads. The body length A is 182 mm, giving an approximate extended length of 935 mm.
Airtac SC80 Standard Cylinder SC80X753STC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X753STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 753 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X753STC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×753 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X753STC Is Used
Material Handling Diverters
The 753 mm stroke and pivoting trunnion mount suit long-reach diverters or kickers on packaging lines, moving products between conveyor lanes with controlled force.
Welding Fixture Clamping
The built-in magnet confirms clamp position via sensors, while the trunnion mount allows the cylinder body to swing into alignment on large welding jigs.
Agricultural Implement Actuation
Provides robust, long-stroke linear motion for chute controls or gate openers on farm equipment, with sensor feedback for position monitoring in dusty conditions.
Is the Airtac SC80 Standard Cylinder SC80X753STC the Right Cylinder?
For applications requiring less force, consider stepping down to the SC63 bore which provides 1559 N at 0.5 MPa. If higher force is needed, the SC100 bore offers 3927 N at the same pressure. At a 753 mm stroke, ensure the rod is adequately supported against side loads; an external linear guide is recommended to prevent rod bending and premature bearing wear.
When replacing this cylinder, match five critical points: 80 mm bore, 753 mm stroke, PT port thread, centre trunnion (TC) mounting with the F-SC80TC bracket, and the built-in magnet (-S) for sensor compatibility. This tie-rod design is shorter than an ISO 15552 cylinder and is not dimensionally interchangeable with that profile.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X753STC FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
No. The SC80X753STC is a double-acting cylinder and will drift or drop if pressure is exhausted. To hold a load or position without live pressure, you must add a pilot-operated check valve, external rod lock, or mechanical brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X753STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.