Airtac SC80 Standard Cylinder SC80X760
The AirTAC Airtac SC80 Standard Cylinder SC80X760 is a genuine double-acting standard air cylinder with a Ø80mm bore and 760mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke760 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X760
The SC80X760 is an 80 mm bore, 760 mm stroke double-acting tie-rod cylinder from the AirTAC SC family. At 0.5 MPa it generates 2513 N pushing and 2268 N pulling, scaling to 4523 N at the maximum operating pressure of 0.9 MPa. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide reliable deceleration for mid-to-long stroke linear moves.
This 760 mm stroke model falls well within the 1500 mm maximum standard stroke for the 80 mm bore, so it is a standard catalogue item. The cylinder body length A is 182 mm, giving a total extended length of approximately 942 mm. PT3/8 ports and an M20x1.5 rod thread are standard, and the unit is supplied with TPU/NBR seals rated for -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X760 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X760 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 760 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X760
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×760 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X760 Is Used
Conveyor Diverters
The 760 mm stroke pushes diverting arms or gates across wide conveyor beds, handling the 2513 N push force needed to redirect packages or pallets reliably at standard plant air pressure.
Press-Feed Transfers
Moves sheet metal or composite blanks 760 mm into a stamping press or CNC work zone. The adjustable cushion decelerates the 25 mm rod smoothly, protecting tooling from impact shock.
Pallet Layer Positioning
Positions a pallet stack or layer sheet across a 760 mm span in automated warehousing. The 2268 N pull force retracts the carriage cleanly, even under moderate guided loads.
Is the Airtac SC80 Standard Cylinder SC80X760 the Right Cylinder?
For applications needing less force, the 63 mm bore SC63 delivers 1559 N at 0.5 MPa; for higher force, the 100 mm bore SC100 provides 3927 N at the same pressure. With a 760 mm stroke, the rod extends significantly from the front bearing — if side loads are present, add an external linear guide or consider a guided cylinder to prevent rod bending and premature seal wear.
To replace an existing SC80X760, match five points: 80 mm bore, 760 mm stroke, PT3/8 port thread, the required mounting accessory (this basic model has none), and the magnet option (this model has no built-in magnet). Always verify the overall extended length and mounting footprint against your machine.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X760 FAQ
At 0.7 MPa (7 bar) the SC80X760 produces 3518 N of push force on extension and 3174 N of pull force on retraction. The theoretical maximum push force at 1.0 MPa is 5026 N, but the rated operating range is 0.15–1.0 MPa.
This specific model (SC80X760) does not include the -S magnet option, so the piston does not carry a magnetic ring. To use CMSG/DMSG/EMSG sensors, order the SC80X760-S variant which has a built-in magnet. Sensors clamp directly onto the tie-rod barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X760
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.