Airtac SC80 Standard Cylinder SC80X760S
The AirTAC Airtac SC80 Standard Cylinder SC80X760S is a genuine double-acting standard air cylinder with a Ø80mm bore and 760mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke760 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X760S
The SC80X760S is an 80 mm bore double-acting tie-rod cylinder with a 760 mm stroke, factory-equipped with a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors. At 0.5 MPa air pressure it generates 2513 N pushing force and 2268 N pulling force, rising to 4523 N push at the 0.9 MPa maximum operating pressure.
This model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT3/8 port connections. The adjustable air cushion at each end (28 mm cushion length) decelerates the piston smoothly, and the body length A is 182 mm. The 760 mm stroke is well within the 1500 mm maximum standard stroke for the 80 mm bore, making this a standard-stroke configuration.
Airtac SC80 Standard Cylinder SC80X760S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X760S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 760 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X760S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×760 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X760S Is Used
Conveyor Diverter Gate
The 760 mm stroke and 2513 N push force at 0.5 MPa reliably shift a diverter gate across a wide conveyor section. The built-in magnet lets CMSG sensors confirm gate position at each end of travel.
Panel Transfer Press Feed
Delivers 4523 N at 0.9 MPa to push large sheet-metal panels into a stamping press. The 28 mm adjustable cushion absorbs impact energy smoothly at the end of the 760 mm stroke, protecting tooling.
Pallet Layer Stacking Arm
Moves a stacking head across a 760 mm span to place layers on a pallet. The -S magnet provides non-contact end-of-stroke sensing via DMSG solid-state switches, ideal for dusty warehouse environments.
Is the Airtac SC80 Standard Cylinder SC80X760S the Right Cylinder?
Choose the SC80 when the 63 mm bore’s 1559 N push at 0.5 MPa is marginal and the application needs the 80 mm bore’s 2513 N force class. If the load is lighter and speed is the priority, stepping down to the SC63 saves air consumption. For heavy side loads or strokes over 300 mm, pair this cylinder with an external guide rail or consider a guided cylinder; the 25 mm rod on a 760 mm stroke is vulnerable to bending under off-axis forces.
To replace an existing SC80X760S, match five points: 80 mm bore, 760 mm stroke, PT port thread, the built-in magnet (-S suffix), and any mounting accessory. This cylinder ships without a mounting bracket (basic mount)—order the required bracket separately using the F-SC80 series (e.g. F-SC80LB for foot mount, F-SC80TC for centre trunnion).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X760S FAQ
At 0.5 MPa (≈73 psi) the cylinder pushes with 2513 N and pulls with 2268 N. At 0.7 MPa it pushes 3518 N, and at the maximum operating pressure of 0.9 MPa it reaches 4523 N push force. The theoretical maximum at 1.0 MPa is 513 kgf, though the operating range is 0.15–1.0 MPa.
Match five key specifications: 80 mm bore, 760 mm stroke, PT3/8 port thread, the built-in magnet (-S suffix), and the mounting style. The SC is a tie-rod cylinder, not an ISO 15552 profile cylinder, so only another AirTAC SC80 (or equivalent tie-rod design) will share the same envelope and mounting dimensions. If your current unit has a foot, flange, or trunnion mount, order the corresponding F-SC80 accessory bracket.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X760S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.