Airtac SC80 Standard Cylinder SC80X760SLB
The AirTAC Airtac SC80 Standard Cylinder SC80X760SLB is a genuine double-acting standard air cylinder with a Ø80mm bore and 760mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke760 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X760SLB
The SC80X760SLB is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at the 0.9 MPa maximum operating pressure), making it a robust linear actuator for medium-to-heavy automation tasks. Its 80 mm bore houses a 25 mm diameter piston rod with PT3/8 ports, and the 760 mm stroke is well within the 1500 mm maximum standard stroke for this bore size.
This model is factory-equipped with a built-in magnet (-S suffix) so CMSG, DMSG, or EMSG reed and solid-state sensors clamp directly onto the tie-rod barrel for contactless position sensing. The LB suffix denotes axial foot mounts (F-SC80LB) for secure surface mounting, while the standard TPU seals and PT threads keep it ready for filtered-air service from -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X760SLB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X760SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 760 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X760SLB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×760 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X760SLB Is Used
Pallet Stop & Lift
The 760 mm stroke and 2513 N push force reliably raise or stop heavy pallets on conveyor lines, with the LB foot mounts bolting directly to the frame.
Press-Fit Assembly
Delivers up to 4523 N at 0.9 MPa for pressing bearings or bushings into housings, with CMSG sensors confirming full extension and retraction.
Baler & Compactor Gate
Operates a long-travel discharge gate on a recycling baler, where the magnet sensors signal gate-open and gate-closed positions to the PLC.
Is the Airtac SC80 Standard Cylinder SC80X760SLB the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N and 4523 N of force; if you can drop to 1559 N at 0.5 MPa, the lighter SC63 reduces air consumption, while stepping up to the SC100 delivers 3927 N at 0.5 MPa. For this 760 mm stroke, ensure the rod is not subjected to side loading—long unsupported strokes amplify bending moment at the rod bearing, so pair the cylinder with an external guide or linear rail if the load is not purely axial. To replace an existing unit, match five points: 80 mm bore, 760 mm stroke, PT port thread, LB foot mounting, and the -S magnet for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X760SLB FAQ
At 0.5 MPa the theoretical push force is 2513 N; at 0.7 MPa it reaches 3518 N, and at the maximum operating pressure of 0.9 MPa it delivers 4523 N. Pull force on the retract stroke is slightly lower due to the 25 mm rod area: 2268 N at 0.5 MPa.
Yes. The -S suffix in the model code means a magnetic piston ring is installed from the factory. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel tie-rods without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X760SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.