Airtac SC80 Standard Cylinder SC80X800SLB
The AirTAC Airtac SC80 Standard Cylinder SC80X800SLB is a genuine double-acting standard air cylinder with a Ø80mm bore and 800mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke800 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X800SLB
The AirTAC SC80X800SLB is a double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at the 0.9 MPa maximum operating pressure). Its 25 mm diameter piston rod and 28 mm adjustable air cushion are built to handle mid-to-heavy linear tasks with controlled end-of-stroke deceleration.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors and comes equipped with an LB foot mount (F-SC80LB) for secure surface installation. The 800 mm stroke is well within the 1500 mm maximum standard stroke for the 80 mm bore, making it a standard-configuration unit ready for immediate deployment.
Airtac SC80 Standard Cylinder SC80X800SLB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X800SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X800SLB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X800SLB Is Used
Conveyor Diverter Gates
The 800 mm stroke and 2513 N push force at 0.5 MPa reliably actuate wide diverter gates on packaging or sorting conveyors, with the LB foot mount providing a rigid, fixed base.
Woodworking Press Clamps
Delivers 4523 N of clamping force at 0.9 MPa for edge-banding or assembly presses. The built-in magnet allows clamp-position sensors to confirm closure before a cycle starts.
Pallet Lifting Stations
Ideal for vertical lift-assist mechanisms in palletizing cells. The 28 mm adjustable cushion smoothly decelerates the 800 mm stroke under load, reducing shock at end-of-travel.
Is the Airtac SC80 Standard Cylinder SC80X800SLB the Right Cylinder?
For applications needing less force, the 63 mm bore SC63 series provides 1559 N at 0.5 MPa. If your load requires more power, step up to the 100 mm bore which delivers 3927 N at the same pressure. Always match bore, stroke, PT port thread, LB foot mounting, and the -S magnet when replacing an existing cylinder.
At an 800 mm stroke, the 25 mm rod is extended significantly. Avoid side loading; if the load is not perfectly guided, use external linear guides or switch to a guided cylinder to prevent rod bending and premature seal wear. The SC80 is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X800SLB FAQ
At 0.5 MPa (5 bar), the push force is 2513 N. At the maximum operating pressure of 0.9 MPa, it reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length (A=182 mm for the 80 bore) than an ISO 15552 profile cylinder. It is only a direct replacement for another AirTAC SC80 tie-rod cylinder matching the same bore, stroke, PT ports, LB mount, and -S magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X800SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.