Airtac SC80 Standard Cylinder SC80X910S
The AirTAC Airtac SC80 Standard Cylinder SC80X910S is a genuine double-acting standard air cylinder with a Ø80mm bore and 910mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke910 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X910S
The SC80X910S is an AirTAC SC series double-acting tie-rod cylinder with an 80 mm bore and a 910 mm stroke, factory-equipped with a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors. Its 25 mm diameter piston rod and PT3/8 ports deliver a push force of 2513 N at 0.5 MPa, scaling up to 4523 N at the maximum operating pressure of 0.9 MPa.
With a body length A of 182 mm and a 28 mm adjustable air cushion at each end, this cylinder decelerates the piston smoothly to reduce end-of-stroke impact. The magnet option allows non-contact position sensing along the barrel without external brackets, making it ideal for automated sequences where stroke-end confirmation is required.
Airtac SC80 Standard Cylinder SC80X910S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X910S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 910 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X910S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×910 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X910S Is Used
Long-Reach Part Transfer
The 910 mm stroke moves components between distant conveyor stations. The built-in magnet enables end-of-stroke sensing to confirm transfer completion before the next cycle starts.
Automated Gantry Axis
Delivers 2513 N at 0.5 MPa for pushing or lifting tooling on a light gantry. The CMSG/DMSG sensors provide precise position feedback to the PLC for multi-stop sequencing.
Palletising Pusher
Pushes boxes or trays onto a pallet with consistent force. The adjustable cushion protects the cylinder and load from shock at the end of the 910 mm travel, even at speeds up to 800 mm/s.
Is the Airtac SC80 Standard Cylinder SC80X910S the Right Cylinder?
Select the SC80 bore when your application needs between roughly 2500 N and 4500 N of pneumatic force. If your load is lighter, stepping down to the SC63 bore saves air and space (1559 N push at 0.5 MPa); for heavier demands, the SC100 bore provides 3927 N at the same pressure. At 910 mm stroke, the unsupported rod length is significant—any side load or misalignment can cause rod bending or premature bearing wear, so use an external guide or a guided cylinder if the load is not purely axial.
For a direct replacement, match five points: 80 mm bore, 910 mm stroke, PT3/8 port thread, the built-in magnet (-S suffix), and the basic (no bracket) mounting configuration. This cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X910S FAQ
At 0.5 MPa the theoretical push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. These values assume clean, filtered air at 40 µm and a properly lubricated or non-lube system.
No. The SC80X910S is a double-acting cylinder and will not hold position if pressure is lost or the directional valve is centred. The piston will drift or drop under load. For load holding without live pressure, you must add a pilot-operated check valve, an external rod brake, or a mechanical lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X910S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.