Airtac SC80 Standard Cylinder SC80X95
The AirTAC Airtac SC80 Standard Cylinder SC80X95 is a genuine double-acting standard air cylinder with a Ø80mm bore and 95mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke95 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X95
The SC80X95 is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining an 80 mm bore with a 95 mm stroke. At 0.5 MPa supply pressure, it generates 2513 N of push force and 2268 N on the pull stroke, making it a capable mid-range actuator for pressing, clamping, and lifting tasks.
This model features a 25 mm diameter piston rod with M20x1.5 male threads and PT3/8 ports. The body length A is 182 mm, giving a total extended length of approximately 277 mm. Its adjustable air cushion (28 mm length) decelerates the piston smoothly at both ends, reducing impact and extending seal life in high-cycle applications.
Airtac SC80 Standard Cylinder SC80X95 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X95 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X95
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X95 Is Used
Package Diverting
The 95 mm stroke and 2513 N push force reliably divert medium-weight cartons or totes on conveyor lines, providing crisp actuation at standard line pressures.
Clamping Fixtures
Delivers consistent clamping force for CNC machining or welding jigs. The adjustable cushion prevents vibration transfer to the workpiece at the end of the stroke.
Small Press Assembly
Ideal for benchtop pneumatic presses performing bearing insertion or riveting. The 25 mm rod diameter provides good column strength for a 95 mm extension.
Is the Airtac SC80 Standard Cylinder SC80X95 the Right Cylinder?
The SC80X95 suits applications needing around 2.5 kN of force. If your load requires less force, stepping down to the 63 mm bore (1559 N push at 0.5 MPa) can reduce air consumption and physical size. For higher force demands, the 100 mm bore delivers 3927 N at the same pressure.
For a 95 mm stroke, side-loading is typically manageable without an external guide, provided the load is aligned axially with the rod. Always match replacements on five points: bore (80 mm), stroke (95 mm), PT3/8 port thread, basic mounting configuration, and the absence of a magnet. This ensures a direct dimensional and performance swap for another AirTAC SC80 cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X95 FAQ
At 0.5 MPa (5 bar) the push force is 2513 N. At 0.7 MPa it rises to 3518 N, and at the maximum operating pressure of 0.9 MPa it reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is shorter in overall length than a comparable ISO 15552 profile cylinder. It is not dimensionally interchangeable. For a correct replacement, match the SC80 model with the same 95 mm stroke, PT3/8 ports, and basic mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.