Airtac SC80 Standard Cylinder SC80X95S
The AirTAC Airtac SC80 Standard Cylinder SC80X95S is a genuine double-acting standard air cylinder with a Ø80mm bore and 95mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke95 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X95S
The SC80X95S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining an 80 mm bore with a 95 mm stroke. At 0.5 MPa it provides 2513 N of push force, making it a strong mid-range actuator for clamping and pressing tasks. The built-in magnet (-S suffix) allows direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors on the barrel for non-contact position sensing.
This model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT3/8 ports. The body length A is 182 mm, giving a total extended length of approximately 277 mm. It features an adjustable air cushion (28 mm length) at both ends to decelerate the piston smoothly. Operating pressure is 0.15–1.0 MPa with standard TPU seals rated for -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X95S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X95S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X95S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X95S Is Used
Conveyor Stop & Diverter
The 2513 N push force at 0.5 MPa easily stops or diverts medium-weight packages on a conveyor line. The built-in magnet enables end-of-stroke sensing to confirm the gate is fully raised or lowered.
Automated Clamping Fixture
Delivers consistent clamping pressure for CNC or welding fixtures. The 95 mm stroke provides a compact retraction distance, and the sensor-ready barrel confirms clamp engagement for machine safety interlocks.
Pneumatic Press Mechanism
With up to 4523 N of force at 0.9 MPa, this cylinder is suitable for light assembly presses, riveting, or staking operations where force and position feedback from barrel-mounted sensors are required.
Is the Airtac SC80 Standard Cylinder SC80X95S the Right Cylinder?
Choose the SC80 bore when the 50 mm bore's 982 N push at 0.5 MPa is insufficient. If your application needs more than 4523 N at 0.9 MPa, step up to the SC100 bore (3927 N at 0.5 MPa). For strokes of 300 mm or longer on this 25 mm rod, evaluate side-load forces and consider an external guide or a guided cylinder to prevent rod bending and premature bearing wear.
To replace an existing cylinder, match five points exactly: 80 mm bore, 95 mm stroke, PT3/8 port thread, the built-in magnet for sensors, and the basic (no bracket) mounting configuration. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X95S FAQ
At the standard operating pressure of 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
Yes. The -S suffix in the model code indicates a built-in magnet on the piston. This allows you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel's external tie-rod slots to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.