The AirTAC AirTAC SDA100X60S Compact Cylinder | 100mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø100mm bore and 60mm stroke, PT3/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC SDA100X60S is a double-acting, single-rod compact cylinder engineered to deliver substantial thrust within a minimal axial footprint. By utilizing a riveted assembly that merges the barrel, rear cover, piston, and rod, this unit achieves an exceptionally short overall length compared to conventional round-body designs. It provides a robust 3927 N of push force and 3524.9 N of pull force at 0.5 MPa, making it suitable for heavy-duty positioning tasks.
This specific configuration includes a built-in piston magnet (denoted by the S option) for direct compatibility with AirTAC magnetic reed or electronic switches, which seat neatly into the grooves surrounding the hard-anodized body. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning operators should incorporate external shock absorbers or slow down the approach velocity when cycling heavy loads at high speeds. The unit features a 32 mm piston rod and PT3/8 porting.
| Model | AirTAC SDA100X60S Compact Cylinder | 100mm Bore |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M18×1.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Provides the 3927 N push force required to eject heavy stamped metal panels from a 100-ton press bed, utilizing the 60 mm stroke to clear the die area efficiently.
Handles vertical lifting of heavy industrial pallets in automated packaging lines, where the built-in magnet enables precise top-position detection via reed or electronic switches.
Delivers the necessary blunt force to break loose large injection-molded plastic components from the core, relying on the fixed NBR bumper to absorb the impact at the end of the stroke.
Selecting this 100 mm bore model is appropriate when your application demands high force output; it generates 3927 N of push at 0.5 MPa. If your load requirement is slightly lower, the neighboring SDA80 bore provides 2513.3 N of push at 0.5 MPa, offering a more compact footprint and lower air consumption. Since 100 mm is the largest standard bore in the SDA family, stepping up beyond this requires evaluating alternative heavy-duty cylinder series.
When integrating the SDA100X60S, verify your system can supply the PT3/8 port adequately and note that the piston rod end features an M18x1.5 female thread. Because this is a double-acting design, it does not inherently hold its position or maintain a load if air pressure is lost or the control valve is centered—the piston will drift. For vertical or suspended loads requiring fail-safe holding, you must incorporate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
This double-acting cylinder generates a push force of 3927 N and a pull force of 3524.9 N at 0.5 MPa. At 0.7 MPa, the push increases to 5497.8 N and pull to 4934.8 N. The theoretical maximum push is 801 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, a standard double-acting cylinder cannot maintain a load or hold its position if air is lost or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates the piston near the stroke end and does not act as a locking brake. For suspended or vertical loads, you must install an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.